1001-196X
2015 Issue 3
Application of multi-fractal method in fault diagnosis of large-scale wind turbines main bearing
LIU Huan;,WANG Jian;,GAO Shu-zhi;,GUO Shuo;,ZHANG Lin-lin;
LIU Huan;,WANG Jian;,GAO Shu-zhi;,GUO Shuo;,ZHANG Lin-lin;
..............page:1-4
Fault feature extraction of large wind turbine main bearing using self-adaption EEMD
ZHANG Lei;,CHEN Chang-zheng;,LIU Jie;
ZHANG Lei;,CHEN Chang-zheng;,LIU Jie;
..............page:5-8
An online hot-expending machine for large-diameter steel pipe
SUN Nian-guang;,WEI Xue-rong;,CAO Xi-yan;,YAN Shan-wu;
SUN Nian-guang;,WEI Xue-rong;,CAO Xi-yan;,YAN Shan-wu;
..............page:9-11
Exploration of wind power bearing ring forming
Xiao Shi-xia;,GuoYang;
Xiao Shi-xia;,GuoYang;
..............page:12-15
Development and application of the forced lubrication mechanism of shearer
ZHAO Yong-ke;,HU Jin-hong;
ZHAO Yong-ke;,HU Jin-hong;
..............page:16-18
Experimental research on the influence of the plate width on rolling mill stiffness
KANG Bing;,ZHANG Xiao-ping;,WANG Yun-jie;,LIU Jie-feng;,CHEN Xi;
KANG Bing;,ZHANG Xiao-ping;,WANG Yun-jie;,LIU Jie-feng;,CHEN Xi;
..............page:19-23
Precision forging of spur gear with axially move controllable die
WANG Jun;,YANG Cheng;,ZHANG Min-na;,TANG Dan-ni;,ZHAO Sheng-dun;
WANG Jun;,YANG Cheng;,ZHANG Min-na;,TANG Dan-ni;,ZHAO Sheng-dun;
..............page:24-30
Flow study of five strand billet caster tundish with numerical simulation and particle image velocimetry
GAO Qi;,WEI Yao-dong;,JIANG Jun;,LU Hai-bo;,ZHOU Shi-kai;,SHI Xue-liang;
GAO Qi;,WEI Yao-dong;,JIANG Jun;,LU Hai-bo;,ZHOU Shi-kai;,SHI Xue-liang;
..............page:31-35
Analyze on the neutral layer offset in straightening process of 11-roll straightening machine
LI Chang-le;,GUI Hai-lian;,LI Yao;
LI Chang-le;,GUI Hai-lian;,LI Yao;
..............page:36-39
Test and analyze on backup-roll of roller leveling machine
LI Yan-wei;,WANG Xiao-gang;,LIU Jian-long;,YUAN Guo-feng;,YUE Zhao-han;
LI Yan-wei;,WANG Xiao-gang;,LIU Jian-long;,YUAN Guo-feng;,YUE Zhao-han;
..............page:40-45
Influence of the straightening technics on the quick-open straightener structure
ZUO Yan-bing;,ZHANG Chao;,WANG En-hui;,HUANG Wei-yong;,CHEN Feng;,CHANG Yu;,HE Qian;,LIU Jie;,CONG Yang-yang;
ZUO Yan-bing;,ZHANG Chao;,WANG En-hui;,HUANG Wei-yong;,CHEN Feng;,CHANG Yu;,HE Qian;,LIU Jie;,CONG Yang-yang;
..............page:46-49
Design of monitoring system based on ARM Cortex-M4 for shearer disk brake
ZHAO Ying;,MENG Xiang;,LI Yan-juan;,WANG Qiang-hui;,LIU Bo;
ZHAO Ying;,MENG Xiang;,LI Yan-juan;,WANG Qiang-hui;,LIU Bo;
..............page:50-53
..............page:54-57
The stress and strain analysis of neck-spinning process of high-strength steel wire based on ANSYS/LS-DYNA
ZHANG Wei;,LU Xiu-chun;,LIU Jin;
ZHANG Wei;,LU Xiu-chun;,LIU Jin;
..............page:58-61
Fatigue life analysis of bridge crane girder based on ANSYS/FE-safe
TANG Fang-xiong;,DING Ke-qin;,WEI Hua-zhong;,SHU An-qing;,LI Xin-yang;
TANG Fang-xiong;,DING Ke-qin;,WEI Hua-zhong;,SHU An-qing;,LI Xin-yang;
..............page:62-65
Kinematics and dynamics simulation of large vertical vessel turning machine
WANG Wei;,CHEN Zai-yu;,CHU Le-ping;,LI Wei;
WANG Wei;,CHEN Zai-yu;,CHU Le-ping;,LI Wei;
..............page:66-70
..............page:71-75
Study on the lifting equipment of charging and discharging machine
ZHOU Bing;,ZHOU Qing-hai;,ZHANG Guo-lin;,HE Guang-xiang;,XIANG Shu-min;
ZHOU Bing;,ZHOU Qing-hai;,ZHANG Guo-lin;,HE Guang-xiang;,XIANG Shu-min;
..............page:76-78
Comparison analysis of involutes helical gear with two design standards
ZHOU Xiang-heng;,WENG Cheng;,LIU Shao-long;
ZHOU Xiang-heng;,WENG Cheng;,LIU Shao-long;
..............page:79-81
Improvement on vacuum disposal system and feeding system for 1#RH unit in Meisteel
WU Jian-long;,CHEN Ya-wen;,Pan Chao-chun;,Ren Tong;,FANG Qi-qing;,ZHANG Ming;
WU Jian-long;,CHEN Ya-wen;,Pan Chao-chun;,Ren Tong;,FANG Qi-qing;,ZHANG Ming;
..............page:82-86
Assembly processing of pumped storage ball valve body and valve
YANG Ming-fang;,WANG Fei;,NIU Yu-ming;
YANG Ming-fang;,WANG Fei;,NIU Yu-ming;
..............page:87-90
A discussion on design management of overseas project
HUANG Jin-chun;,LI Jun-hui;,WEI Yao-dong;,YANG Bo;,WANG Wen-xue;,ZENG Jing;
HUANG Jin-chun;,LI Jun-hui;,WEI Yao-dong;,YANG Bo;,WANG Wen-xue;,ZENG Jing;
..............page:91-94