1001-196X
2013 Issue 6
The analysis of technology innovation strategy of Chinese iron and steel enterprises in the post-financial crisis Era
YE Hong-yu;,ZHU Tao;
YE Hong-yu;,ZHU Tao;
..............page:1-5
Research on the guide rollers automatic location control of ring radial-axial rolling NC equipment
GU Rui-jie;,LIANG Jian-zhu;,QUAN Xiao-hui;,SU Zhen-hua;,YANG Da-xiang;,YANG Zhan-fei;,ZHANG Shu-lian;
GU Rui-jie;,LIANG Jian-zhu;,QUAN Xiao-hui;,SU Zhen-hua;,YANG Da-xiang;,YANG Zhan-fei;,ZHANG Shu-lian;
..............page:6-9
The development and application of Baosteel φ250mm Ten-roll bar straightener
LIU Lei;,MA Qiang;,WANG Shi-jie;,ZHAO Xi-han;
LIU Lei;,MA Qiang;,WANG Shi-jie;,ZHAO Xi-han;
..............page:10-12
Application and innovation of RH key technique in steel enterprise
MA Zheng-feng;,MENG Fan-ya;,ZHANG Ya-nan;,ZHANG Yu;,ZHOU You-jun;
MA Zheng-feng;,MENG Fan-ya;,ZHANG Ya-nan;,ZHANG Yu;,ZHOU You-jun;
..............page:13-16
Development and application of the highly-efficient top-lance baking technology for RH vacuum chamber
CAO Yong-heng;,FANG Qi-qing;,JIA tao;,WU Jian-long;,ZHANG Ming;,ZHAO Feng-hui;
CAO Yong-heng;,FANG Qi-qing;,JIA tao;,WU Jian-long;,ZHANG Ming;,ZHAO Feng-hui;
..............page:17-22
New double rotating pay off reel
XUN Feng-chao;
XUN Feng-chao;
..............page:23-24
Investigation on the maximum extrusion speed control of the difficult-to-deform alloy press
CHENG Xiao-le;,PANG Li;,WANG Jun;,XUE Fei-fei;,YANG Jian;,ZHANG Li-bo;,ZHENG Wen-da;
CHENG Xiao-le;,PANG Li;,WANG Jun;,XUE Fei-fei;,YANG Jian;,ZHANG Li-bo;,ZHENG Wen-da;
..............page:25-27
Research of four-roll mill parametric design system
DU Feng-shan;,LIU Jie;,YANG Peng;
DU Feng-shan;,LIU Jie;,YANG Peng;
..............page:28-31
Dynamic analysis of pay-off and tension reel of the strip high speed finishing line
GAO Cong-min;,LIU Yun-fei;,MA Wei-ran;,REN Yu-cheng;,SUN Ya-bo;,XU Chang-an;,ZHANG Kang-wu;
GAO Cong-min;,LIU Yun-fei;,MA Wei-ran;,REN Yu-cheng;,SUN Ya-bo;,XU Chang-an;,ZHANG Kang-wu;
..............page:32-35
Analysis and verification for the load deflection of plate bending
HUANG Qing-xue;,LI Jin-feng;,LI Ming-ming;,MA Li-dong;,YANG Guang-ke;
HUANG Qing-xue;,LI Jin-feng;,LI Ming-ming;,MA Li-dong;,YANG Guang-ke;
..............page:36-39
Research on the partial load problem of the hydraulic machine for packaging of copper cathodes
CHEN Guo-ding;,HUANG Wen-ting;,SUN Dong-ming;,YUE Zhan-bin;
CHEN Guo-ding;,HUANG Wen-ting;,SUN Dong-ming;,YUE Zhan-bin;
..............page:40-43
Five-axis NC machining technology research based on cimatron E8.5 marine propellers
FU Da-peng;,MA Yan-li;,ZHU Yong-liang;
FU Da-peng;,MA Yan-li;,ZHU Yong-liang;
..............page:44-46
Research and design of bending section for special thick slab caster
JIANG Jun;,LI Xin-qiang;,LIU Jun-ping;,SONG Mei-juan;,YAO Yun;,ZHOU Shi-kai;
JIANG Jun;,LI Xin-qiang;,LIU Jun-ping;,SONG Mei-juan;,YAO Yun;,ZHOU Shi-kai;
..............page:47-51
Application of 3-D software in checking the elevating capacity of the auxiliary hook of a crane
SONG Yu;,WU Guo-ping;,ZHANG De-guo;,ZHANG Guo-dong;
SONG Yu;,WU Guo-ping;,ZHANG De-guo;,ZHANG Guo-dong;
..............page:52-55
Leveler PSO two-degree-freedom internal model synchronization control of electro-hydraulic servo system
BAI Lin;,HUANG Qing-xue;,YUE Guang;,ZHANG Hua-jun;
BAI Lin;,HUANG Qing-xue;,YUE Guang;,ZHANG Hua-jun;
..............page:56-60
Structural optimal design of THP98C-1000 hydraulic press upper-beam based on orthogonal experiment
ZHONG Wei-hong;
ZHONG Wei-hong;
..............page:61-64
Based on the fuzzy neural network adaptive volume of plate straightening machine bending setting
HU Ying;,LI Wen-qiong;
HU Ying;,LI Wen-qiong;
..............page:65-68
Design and simulation analysis of reducer performance test-bed
GONG Yu-xue;,SHEN Zhao-kui;
GONG Yu-xue;,SHEN Zhao-kui;
..............page:69-73
Stress and strain analysis of 50 MN hydraulic machine
LIU Jie;,XUE Zhan-jun;
LIU Jie;,XUE Zhan-jun;
..............page:74-77
Application of wavelet-envelope analysis to gear fault diagnosis
LI Jian-qiang;,LI Shu-lei;,WU Jin-ping;,ZHANG Kan-cang;,ZHANG Yu-ning;
LI Jian-qiang;,LI Shu-lei;,WU Jin-ping;,ZHANG Kan-cang;,ZHANG Yu-ning;
..............page:78-80
Analysis of the damage of gear shaft of the reducer
WANG Hong-ru;
WANG Hong-ru;
..............page:81-83
Mechanism and measures to adopt for outer arc indentation of stainless steel slab
JIN Bo;,LEI Hua;,WANG Wen-xue;,ZENG Jing;
JIN Bo;,LEI Hua;,WANG Wen-xue;,ZENG Jing;
..............page:84-85
Technical innovation of 300 t manual packing machine
CHEN Yun-dong;,LIAO Ke;
CHEN Yun-dong;,LIAO Ke;
..............page:86-89