Tianjin Metallurgy 2014 Issue 2 Importance of High-end Product Development for Enhancing Enterprise Core Competitiveness

Importance of High-end Product Development for Enhancing Enterprise Core Competitiveness
SUN Kai-ming;

..............page:1-4

Development of 7-5/8 inch Super High Strength Flush Joint Oil Casing
HU Li;,LI Heng-zheng;,LU Xiao-qing;,WANG Zheng;,ZHANG Xu;

..............page:5-7

Development of TP-QR Connector for Large Diameter Special Casing
MEI Li;,ZHU De-wang;

..............page:8-10,13

Study and Practice on Continuous Casting Process of (φ)500 mm Sectioned Bloom
HE Bing-lin;,WANG Xiao-hong;,ZU Feng;

..............page:11-13

Study on Pipe End Necking Down and Stress Relief Annealing Process
HOU Zhen-yu;,LUO Jing-hui;,SONG Jia-rui;

..............page:14-17,21

Practice of High Aluminum Steel 38CrMoAlA Production Process
MIAO Feng;,WANG Feng-chan;,WANG Xiao-hong;,YU Yong;

..............page:18-21

Study on Drift Process of Anti-collapse Oil Casing
GAO Rui-quan;,LI Hong-min;,Yao Yong;,YIN Xi-quan;

..............page:22-24

Practice of Calcium and Sulfur Control Process for Ca/S ≥ 1 Pipeline Steel
LI Jian;,MIAO Feng;,WANG Feng-chan;,WANG Xue-yi;,YU Yong;

..............page:25-27

Analysis and Control of Billet Surface Crack for 210 mm 12Cr1MoVG
HE Bing-lin;,WANG Feng-chan;,WANG Xiao-hong;

..............page:28-30

Hot Rolling Production of TP110-SUP13Cr Thin Wall Oil Casing
DING Hong-jun;,DING Wei;,LIANG Hai-quan;,SUN Qiang;

..............page:31-34,37

Process Study on X80Q Graded Seamless Pipe for Pipeline Application
HOU Qiang;,SHI Qing-zhi;,WANG Li-zhi;,ZHANG Zhe-ping;

..............page:35-37

Study on Heat Treatment Process for 27SiMn Thick-walled Seamless Steel Pipe
JI Bao-cai;,PAN Jing-ping;,SHI Pan;,WANG Hua;

..............page:38-40

The Process Practice of (φ) 400 mm Bloom of GCr15SiMn Bearing Steel
JIANG Peng-fei;,WANG Qiang;,YUAN Xu-yang;,ZHANG Liang;,ZU Feng;

..............page:41-43,47

Quality Control over Internal Defect of Small Diameter High Pressure Boiler Pipe
DING Hong-jun;,GAO Zhan-zhan;,LIANG Hai-quan;,NING Mei;,ZHU Ren-jun;

..............page:44-47

Practice of Optimizing Sinter Size Composition and Strength Indices
GAO Yang;,XIA Ming-he;,ZHANG Zhi-chao;

..............page:48-50,53

Practice of EAF Argon Bottom Blowing Process
DOU Bo;,LI Xin;,YUAN Xu-yang;

..............page:51-53

Practice of HP13Cr Stainless Steel Production Process
SONG Zhi-yu;,WANG Feng-chan;,YUAN Xu-yang;,ZU Feng;

..............page:54-57

Test and Study on Material Selection by CO2 Corrosion Environment Simulation of CCS Project
LV Chuan-tao;,SHI Bin;,WANG Xiu-fen;,WANG Yong-sheng;,ZHENG Fei;

..............page:58-60

Cross Rolling Piercer Pass Opening Illustration by UG
LI Shuang-quan;,LU Li-feng;,WANG Qing-wei;

..............page:61-63

Practice of Reducing Inclusion Caused by Submerged Nozzle Bottom Clogging
BAI Ya-dong;

..............page:64-65,69

Study and Application of Control and Calculation Model for Pipe Longitudinal Wall-Thickness
LIANG Hai-quan;,QIN Li-bo;

..............page:66-69

Trail and Study on New T23 Seamless Steel Pipe Heat Treatment Process
CAO Jin-rong;,HE Biao;,XIAO Gong-ye;,ZHAO Qing-quan;

..............page:70-72,75

A New Method for Calculating Special Threaded Connector Value of Oil Casing
LUO Jing-hui;,LV Chun-li;,PAN Jing-ping;

..............page:73-75

Trail and Study on Welding Performance of L360QS Gathering Pipeline Pipe
CAI Cai-xia;,DING Lei;,LI Yan;,YANG Xun;,YAO Jun;,ZHAO Xing-liang;,ZHENG Fei;

..............page:76-78,81

Measurement of Pb, Sn, As, Sb and Bi in Low Alloy Steel with ICP-MS
HAN Li-hua;,WANG Wei;,YU Sheng;

..............page:79-81

Evaluation Test on Defect Detecting Capability of Automatic Detection Device
LIANG Zhi-nong;,ZHANG Xue-jiang;,ZHAO Ren-shun;

..............page:82-86

Study on Magnesite Composition Measurement with X-ray Fluorescence Spectrometry
GONG Yi-yong;,HAN Chun-mei;,HAN Li-hua;,YANG Zhi;

..............page:87-88

Method and Study on Potassium, Sodium, Lead and Zinc in Raw Material by X-ray Fluorescence Analysis
WANG Tie-mao;

..............page:89-91

Analysis on Formation Mechanism of Hydrogen Blister in Medium and Low Carbon Steel
CHENG Lin;,MU Rui-san;,NING Mei;,YE Xiao-jun;,ZHANG Zhi-yuan;,ZHAO You-yun;,ZHOU Wei;

..............page:92-95,98

Measurement of Titanium in High Carbon Ferrochrome with ICP-AES
WANG Wei;,XIN Shu-xia;,YU Sheng;

..............page:96-98

Influence of Addition on Steel Bluing Process and Properties of Bluing Membrane
FENG Xin;,LIU Dong;,LIU Xu-hua;

..............page:99-101,109

Inspection and Analysis on Samples of Hydrogen Induced Crack for Pipeline Pipe
MU Rui-san;,YANG Xun;,YE Xiao-jun;,ZHANG Zhi-yuan;

..............page:102-105

xin xi dong tai

..............page:105,113,147-148

Design and Realization of Special Contract Review Management System at Pipe Enterprise
DING Li-hui;

..............page:106-109

Process and Control of Frequency-controlled Make-up Water System for Closed-Loop Circulated Cooling Water at Steel-making plant
MENG Zhao-yang;

..............page:110-113

Application of JSON Data Format to Enterprise Date Exchange
SONG Qing-shan;

..............page:114-117

Application of Multi-task Analyzing System to VOD Production
HE Bing-lin;,YUAN Xu-yang;,ZU Feng;

..............page:118-121

Backup and Recovery of Enterprise Internal Data by BESR Software
PANG Song-tao;

..............page:122-123,126

Influence of Maintenance of Infrared Carbon Sulfur Analyzer on Analysis Result
LIU Yong;,ZHANG Wei;

..............page:124-126

Modification of Manipulator of Ladle Shroud at CCM
MA Baoli;,MIAO Feng;,WU Wei;,YAN Tao;

..............page:127-129,133

Machining of Big Bore Rolling Stand
LIU Peng;,ZHAO Lei;

..............page:130-133

Brief Talk on Continuous Improvement and Lifting of Supplier Management of TPCO Supply Department
SUN Wen-bo;

..............page:134-137

Analysis on Relationship between ISO 9001 System Implementation and Enterprise Culture Construction
GONG Tao;,LI Hai-feng;,SONG Chen-yang;,ZHANG Jin;

..............page:138-140,143

Idea and Method of Drawing up Enterprise Development Research Report
WU Lei;

..............page:141-143

Brief Talk on Development and Application of QC Group Work in Enterprise
LI Qiang;,WANG Jun;

..............page:144-147