Plastics 2012 Issue 1 Surface Modification of Polyethylene Wax and Performance Impact on Wood Powder/HDPE Composite

Surface Modification of Polyethylene Wax and Performance Impact on Wood Powder/HDPE Composite
JIANG Hong-li;LI Bin;ZHANG Chang-jun;LIN Xiao-hui;CHEN Zhen

..............page:21-23

Microcapsule Antibacterial Film from Clove Oil
HAO Xi-hai;SUN Miao;DENG Jing;SHI Cui-ping;LI Hui-min

..............page:64-66

Effect of Molecular Weight on Pin-Disc Friction and Wear Behaviors of UHMWPE under Dry Friction
WU Li;DU Xiao-qiu;YIN Chuan-qi;QIN Xiang-pei;QIN Jian-hua;GAO Xin-lei

..............page:71-73

Preparation and Properties of Paraffin/Active Carbon Phase Change Materials
WANG Zhong;CHEN Li-gui;FU Lei

..............page:74-76

The Rheological Behavior of Semi-aromatic Transparent Polyamide Prepared by Solid State Polycondensation
JIANG Ai-yun;ZHAO Lei;LI Xin-fa;CHEN Jin-zhou

..............page:81-82,66

Preparation and Flame Retardancy of Novel Monomolecular P-Br Flame Retardant Rigid Polyurethane Foam Material
LU Lin-gang;ZHOU Xia;ZHAO Min

..............page:9-12

Surface Modification of Polyethylene Film with PAMAM Dendrimer
DANG Xiao-hui;YANG Biao;JIN Yu-juan;ZHANG Cong

..............page:16-17,89

The Analysis of Current Application Situation for Steam-Assisted Injection Technology
DING Zhi-ying;LIU Bin

..............page:42-46

Preparation of Calcium Sulfate Whisker and It\'s Application in Plastics
TIAN Hao;XUE Tao;NIE Deng-pan;WANG Zhen-Jie

..............page:47-49,112

Flame Retardant of Brominated Polystyrene Resin in the PBT/EPDM Alloy
TIAN Wei-chun;GUO Jian-bing;YU Lei;FAN Quan-bao;WANG Feng;HU Xiao-yu

..............page:31-33

The Effect of Imidization Polyimide Thermal Properties
YAN Wei-xing;FENG Xiao-ming;ZHANG Ying-tang

..............page:18-20

Investigation of the Properties of Epoxy-Functionalized Acrylonitrile-butadiene-styrene Toughened Poly (butylene terephthalate) and Its Blends
SHI Jin-liang;PENG Jing-jun;LIU Yi-mei;WANG Xing-yue;FU Yan;SUN Shu-lin

..............page:13-15

xin xi dong tai

..............page:116-117,36,93,100

The Characterization and the Main Factors of the Accuracy in the Micro-injection Molding Products
HOU Li-jun;LIU Ying;WU Da-ming;LUO Yi-wei

..............page:90-93

Deeply Study of Scale-up Parameters Optimization of Co-rotating Twin- Screw Extruder
CAO Li;LI Ao;BI Chao;JIANG Bo

..............page:83-86

Modification of the Water Vapor Barrier of Polylactide
ZHAO Jian-jian;GUI Zong-yan;LU Chong;GAO Yun;CHENG Shu-jun

..............page:1-4

Runner of Injection Mould based on Moldflow Analysis of Relationship between Balance and Screw Speed
ZHOU Da-lu

..............page:105-107

Performance Comparison of Modification Poly(butylenes-succinate) by Diglycollic Acid and 1,4-Cyclohexanedimethylene
ZHANG Min;HUI Yuan-yuan;ZHANG Ruo-lin;QIU Jian-hui

..............page:5-8

Numerical Modeling of Tensile Properties of Starch-PLA Composite
SUN Xiao-ling;FAN Xiao-ping;XIANG Hong;ZHOU Jia-hua

..............page:108-112

Polypropylene/Expanded Graphite/Carbon Fiber Thermal Conductive Composite
XU Rui-jie;LEI Cai-hong;YANG Zhi-guang;LIAO Dun-zeng;LIU Shun-li

..............page:34-36

The Effect of Content of CaCl2 on the Structure and Properties of PA6/CaCl2 Composite
LU Sheng-jun;LI Fei;HE Min;YU Jie

..............page:39-41,27

Numerical Simulation and Analysis of the Effect of Some Materials and Processing Parameters on the Gas Assisted Extrusion of Ultra-high Molecular Weight Polyethylene
LIU He-sheng;ZHANG Xiao-xia

..............page:94-97,8

ren wu jie shao

..............page:141-142

Dynamical Rheological Behavior of Polyamide 11/Graphene Oxide(GO) Nanocomposite
CHEN Chun-yin;ZHAO Cai-xia;GUO Wei-nan;MA Jian-li;LIN Shan;WANG Biao-bing

..............page:67-70

Investigation on the Rheological Behavior of Polyamide 6/POE/EVOH Blends
GUO Wei-nan;ZHAO Cai-xia;CHEN Chun-yin;MA Jian-li;LIN Shan;WANG Biao-bing

..............page:58-60,54

Theory Research of Bubble Inflation in Polystyrene and Polypropylene Foaming Process
CAI Shi-guo;XIN Chun-ling;LI Qing-chun;HE Zhao-hui;HE Ya-dong

..............page:50-54

The Effect of the Coupling Agent on Bamboo/Wood-Plastic Composite Properties
CHEN Wei-bo;GE Zheng-hao;YUAN Qing-kai;YUAN Ni-juan;TIAN Pu-jian

..............page:37-38,86

Melt Strength of PP/PA66/POE-g-MAH Blend System
CAO Xian-wu;WANG Xiao-lin;ZHU Xu;QU Jin-ping

..............page:55-57,23

Investigation on Nonisothermal Crystallization Kinetics of Poly (lactic acid)/Poly(butylene adipate-co-terephthalate) Blends by Transesterification
LIN Shan;MA Jian-li;CHEN Chun-yin;GUO Wei-nan;LI Qing-jiao;WANG Biao-bing

..............page:77-80,20

Influence of Injection Process Parameters on the Interfacial Adhesion Strength of Two-Material Injection Molding Sample
AO Jing-pei;ZHANG Jing-jing;CHEN Qi-li;LIN Kai;ZHANG Zhi-tian

..............page:87-89

Polyvinyl Chloride Filled with Modified Carbide Slag
LIU Tong

..............page:28-30,12

Simulation of Effects of Injection Process Parameters on Warpage of Ultra-thin Light-guide Plates
DONG Peng-wei;ZHAO Zhong-li;ZHANG Ya-jun;WU Da-ming

..............page:98-100

Effects of Glass Fiber and Lanthanum Oxide on the Thermal Behavior and Mechanical Properties of ABS Composite
WU Shao-li;XU Di;ZHANG Sheng;XU Jian;GUO Lan-fang

..............page:24-27

Compatibility Prediction and Characterization of PVDF/PVA Blend based on Three-Dimensional Solubility Parameters
ZHAN Shi-ping;WANG Yu-jing;HUANG Xing;REN Jian-peng

..............page:61-63

Analysis and Optimization of Injection Molding for Socket Panel based on Moldflow
WANG Qian

..............page:113-115

Design of Spin-tub\' s Hot Runner Injection Mold based on Pro/E
XIAO Xiao-feng;SONG Qi;XUE Qiong

..............page:101-104