High-strain-rate superplasticity in oxide ceramics:a trial of microstructural design based on creep-cavitation mechanisms
Keijiro HIRAGA;Byung-Nam KIM;Koji MORITA;Hidehiro YOSHIDA;Yoshio SAKKA and Masaaki TABUCHI National Institute for Materials Science;1-2-1;Sengen;Tsukuba-shi;Ibaraki 305-0047;Japan

..............page:195-204

Creep and creep-fatigue behavior of high chromium steel weldment
Yukio TAKAHASHI 1) and Masaaki TABUCHI 2) 1) Materials Science Laboratory;Central Research Institute of Electric Power Industry;Yokosuka;Kanagawa 240-0196;Japan 2) National Institute of Material Sciences;Tsukuba;Ibaraki 305-0047;Japan

..............page:175-182

Microstructural evolution and change in hardness during creep of NF709 austenitic stainless steel
Yan ZHAO 1);Jie ZHAO 1) and Xiaona LI 2) 1) School of Material Science and Engineering;Dalian University of Technology;Dalian 116085;China 2) Key Laboratory of Materials Modification by Laser;Ion and Electron Beams of Ministry of Education;Dalian University of Technology;Dalian 116085;China

..............page:220-224

Microstructure and nano-mechanical property of cold spray Co-base refractory alloy coating
Yongli LIANG 1);Bi SHI 1);Xiaoping YANG 1);Junbao ZHANG 1) and Xianming MENG 2) 1) Advanced Technology Institute;Baosteel Technology Center;Baoshan Iron & Steel Co.;Shanghai 201900;China 2) School of Materials Science and Engineering;Dalian University of Technology;Dalian 116024;China

..............page:190-194

Effect of solution treatment on microstructures and mechanical properties of AISI 321 service
Yanhui ZHAO 1);Haitao MA 1);Lai WANG 1);Changhai SUN 1) and Chao GUO 2) 1) School of Materials Science and Engineering;Dalian University of Technology;Dalian 116024;China 2) West Pacific Petrochemical Company Ltd.;Dalian 116600;China

..............page:243-248

Effects of aging treatment on microstructure and mechanical properties of Cr25Ni35Nb and Cr35Ni45Nb furnace tube steel
Limin SHEN;Jianming GONG;Yong JIANG and Luyang GENG College of Mechanical and Power Engineering;Nanjing University of Technology;Nanjing 210009;China

..............page:235-242

Correlation between brazed joint elevated strength,microstructure and brazing processing parameter of Inconel superalloy
Chunwei MA;Kun SHI;Zhishui YU and Peiquan XU Department of Materials Engineering;Shanghai University of Engineering Science;Shanghai 201620;China

..............page:205-212

Evaluation of microstructure and creep damage in high-Cr ferritic steel welds
Masaaki TABUCHI and Hiromichi HONGO National Institute for Materials Science;1-2-1 Sengen;Tsukuba;Ibaraki;305-0047;Japan

..............page:225-234

A 2-D mesoscopic model for the evaluation of creep damage induced by void growth in polycrystalline metals
Tao YU 1);Kimiaki YOSHIDA 2) and Huiji SHI 1) 1) Key Laboratory of Applied Mechanics;Department of Engineering Mechanics;Tsinghua University;Beijing 100084;China 2) Research Laboratory;Ishikawajima-Harima Heary Industries Co.;Ltd.;Tokyo;Japan

..............page:213-219

Fracture behavior of 304 stainless steel coatings by cold gas dynamic spray
Wei HAN 1);Xianming MENG 1);Jie ZHAO 1) and Junbao ZHANG 2) 1) School of Materials Science and Engineering;Dalian University of Technology;Dalian 116085;China 2) Baosteel Research Institute;Baoshan Iron & Steel Co.;Ltd.;Shanghai 201900;China

..............page:249-254

Creep behavior of plasma sprayed NiCr and NiCrAl coating-based systems
Xiancheng ZHANG;Changjun LIU;Fuzhen XUAN;Zhengdong WANG and Shan-Tung TU Key Laboratory of Safety Science of Pressurized System;Ministry of Education;East China University of Science and Technology;Shanghai 200237;China

..............page:183-189