Journal of Aerospace Power 2010 Issue 8 Fatigue life prediction model for nickel-based single crystal and directionally solidified superalloy

Fatigue life prediction model for nickel-based single crystal and directionally solidified superalloy
SHI Duo-qi;YANG Xiao-guang;YU Hui-chen

..............page:1871-1875

Three-dimensional numerical simulation of continuous rotating detonation engine flowfields
SHAO Ye-tao;WANG Jian-ping;TANG Xin-meng;SHI Tian-yi

..............page:1717-1722

Study on the flow of the kerosene in micro tube
LI Zhong-zhou;ZHU Hui-ren;ZHANG Xia

..............page:1728-1732

Path planning for maneuver of the satellite based on a multi-objective evolutionary algorithm
SHEN Xiao-ning;ZHOU Duan;GUO Yu;CHEN Qing-wei;HU Wei-li

..............page:1906-1912

Influence of rotor blade fillets on turbine stage performance
SHI Yan;LI Shao-jun;LI Jun;FENG Zhen-ping

..............page:1842-1848

Numerical simulation on thrust reverser based on secondary flow for high-bypass-ratio turbofan engine
LIU Chun-yang;WANG Zhan-xue;FU Peng-zhe

..............page:1811-1817

Numerical simulation of fluid-solid-thermal interaction in hypersonic flows
LI Peng-fei;WU Song-ping

..............page:1705-1710

Review of aero-engine case containment research
XUAN Hai-jun;LU Xiao;HONG Wei-rong;LIAO Lian-fang

..............page:1860-1870

Research of sidewall effect on binary external-compression inlet flow field
YAN Hong-ming;ZHONG Jing-jun;HAN Ji-ang;FENG Zi-ming

..............page:1783-1790

Numerical method for modelling missile turbojet engine windmill start process
YANG Xin-yi;SHEN Wei;LIU Hai-feng;DONG Ke-hai

..............page:1776-1782

Effect of lobe numbers on the performance of a lobed mixer in the forced mixing exhaust system
LIU You-hong;FAN Chao;XIE Yi;SHAO Wan-ren;XU Ling

..............page:1683-1689

Numerical study of convective heat transfer characteristics of kerosene flowing in a horizontal pipe at supercritical pressure
LI Xun-feng;ZHONG Feng-quan;FAN Xue-jun;HUAI Xiu-lan;CAI Jun

..............page:1690-1697

Effects of local boundary layer suction on aerodynamic performance of highly-loaded compressor cascades
CHEN Shao-wen;GUO Shuang;CHEN Fu;WANG Zhong-qi

..............page:1836-1841

Dynamic efficiency investigation of the transmission of tilt-rotor
GUO Jia-shun;WANG San-min;YUAN Ru

..............page:1894-1899

Half-modified roll for the optimization of transmission error function of spiral bevel gears
LIU Guang-lei;FAN Hong-wei;GU Ji-hong;JIANG Ping

..............page:1888-1893

Experimental investigation on seal characteristics of straight-through labyrinth
ZHANG Xia;ZHANG Xiao-wei;ZHU Hui-ren;WANG Zhen-wei

..............page:1753-1757

Study on fuel spray characteristics of gasoline direct injection reciprocating engine
LI Bo;LI Yun-qing;WANG De-fu

..............page:1723-1727

Experimental analysis of operating characteristics of a miniature capillary pumped loop
BAI Li-zhan;LIN Gui-ping

..............page:1711-1716

Influence of height on the starting performance of RBCC engine supersonic sidewall-compression inlet
LIU Xiao-wei;HE Guo-qiang;LIU Pei-jin

..............page:1799-1804

Structural optimization of turbine tenon/mortise
YANG Min-chao;SUN Su-ya

..............page:1876-1882

Reliability assessment and life prediction for very few failure data
FU Hui-min;YUE Xiao-rui;ZHANG Yong-bo

..............page:1855-1859

Numerical simulation of flow and heat transfer in the co-rotating cavity with de-swirl inflow
CHEN Yang-chun;WANG Suo-fang

..............page:1746-1752

Investigation of two-dimensional supersonic twin inlet with slot-coupled cavity in 90°configuration at venter
MA Xiao-fei;XIE Lü-rong;GUO Rong-wei

..............page:1818-1824

Numerical simulation of unsteady flow in a vaneless counter-rotating turbine
QI Lei;PAN Shang-neng;LI Wei;ZOU Zheng-ping;LIU Huo-xing;ZHOU Yang

..............page:1825-1835

Self-adaptive center-mutation differential evolution and its application to shape optimization design of a turbine blade
CHI Yuan-cheng;FANG Jie;RAO Da-lin;CAI Guo-biao

..............page:1849-1854

Momentum characteristic of dielectric barrier discharge plasma aerodynamic actuation
ZHAO Xiao-hu;LI Ying-hong;LI Yi-wen;YUE Tai-peng;WANG Xue-de

..............page:1791-1798

Numerical analysis of multi-mode mixed disturbance wave in a supersonic plane shear layer
GUAN Fa-ming;SHEN Qing;WANG Qiang

..............page:1768-1775

Experiment of the effects of geometrical parameters on internal heat transfer in an impinging contraction channel with liquid crystal transient technique
ZHOU Lei-sheng;ZHU Hui-ren;ZHANG Xia;LI Chun-lin

..............page:1698-1704

Experimental investigation on discharge coefficient of film holes in a longitudinal ripple insulated liner
WANG Yin-hui;CHANG Hai-ping;WANG Yu-mei

..............page:1758-1762

Two effective methods for flow-field performance forecast
WANG Bao-guo;WU Jun-hong;LIU Shu-yan;QIAN Geng;LIU Yan-ming

..............page:1763-1767

Flow modeling of oil film on bearing chamber wall at high-speed
LIU Ya-jun;CHEN Guo-ding;WANG Jun

..............page:1900-1905

Influence of geometric parameters on film cooling effectiveness under adverse pressure gradient
FAN Yi-long;ZHU Hui-ren;LI Yong-hong;LI Guang-chao;FAN Hui-ming

..............page:1738-1745

Research on rotor blade hinge moment of a small-scale coaxial helicopter
XU Guan-feng;CHEN Ming

..............page:1805-1810

Experimental investigations of deflagration to detonation transition in toroidal section tube
YU Jun-li;QIN Ya-xin;GAO Ge

..............page:1733-1737

Experimental study on the relationship between bearing preload and system natural frequency
DENG Si-er;WANG Yan-shuang;LI Xin-ning

..............page:1883-1887

Investigation on dynamic characteristic of recessed region of a gas-liquid coaxial injector with homogeneous flow model
FU Qing-fei;YANG Li-jun;QU Yuan-yuan;GU Bin;WANG Feng

..............page:1918-1922

Adaptive model of aero-engines based on error-feedback control
WANG Qian-yu;SUN Jian-guo;LI Qiu-hong

..............page:1913-1917