Journal of Aerospace Power 2009 Issue 7 Wind tunnel experiment 0f sidewall compression inlet with adjustable attack angle

Wind tunnel experiment 0f sidewall compression inlet with adjustable attack angle
GUO Bin;ZHANG Kun-yuan

..............page:1601-1605

Large-eddy simulation of particle dispersion and velocity similarity in a two-phase round turbulent jet
WANG Bing;ZHANG Hui-qiang;WANG Xi-lin

..............page:1464-1469

Measurements of the flow fields in a model annular combustor using particle image velocimetry
DANG Xin-xian;ZHAO Jian-xing;ZHANG Xin;XU Rong;YAN Ying-wen;LIU Yong

..............page:1470-1475

Improvement and validation of a planar cascade inverse design method
ZHANG Pei;CHU Wu-li;WU Yan-hui;ZHANG Hao-guang;LU Jia-ling

..............page:1627-1632

Experimental research on metal rubber shock isolation system
YAN Hui;JIANG Hong-yuan;LIU Wen-jian;HAO De-gang

..............page:1518-1522

Aerodynamic noise analysis and control for mini-van car side view mirror
WANG Yi-ping;GU Zheng-qi;YANG Xue;LI Wei-ping;YUAN Zhi-qun

..............page:1577-1583

Pressure distribution and stress calculation of glaze ice on iced airfoil
XIAO Chun-hua;GUI Ye-wei;YI Xian;DU Yan-xia

..............page:1457-1463

Aero-engine fault diagnosis based on consistent-approximative denoted space
CHENG Si-yi;SUO Zhong-ying;WU Hua;ZHANG Guan-rong;ZHONG Qiu

..............page:1644-1648

Numerical simulation Of fluid-structure interaction in conical parachute\'s opening process
WU Zhuo;CAO Yi-hua;SONG Qian-fu

..............page:1584-1593

Determination of rotation center in industrial computed tomography system
LI Bao-lei;FU Jian;WEI Dong-bo;LI Jun-jiang

..............page:1544-1548

Digital simulation of spiral bevel gears\' real tooth surfaces based on non-uniform rational B-spline
ZHANG Jun-hui;FANG Zong-de;WANG Cheng

..............page:1672-1676

Research on low cycle-multiaxial fatigue-creep life prediction at high temperature for turbine blade
PENG Li-qiang;WANG Jian

..............page:1549-1555

Investigation on film cooling heat transfer for double row dust-pan shaped holes
GUO Tao;ZHU Hui-ren;XU Du-chun

..............page:1488-1492

Numerical simulation of mixing flow of air and water droplet in the test duct of icing research tunnel
KE Peng;YANG Chun-xin;WU Jiang-hao;ZHANG Shu-guang

..............page:1449-1456

Dynamical response analysis on blades arisen by aerodynamic forces through sequential method
ZHANG Da-yi;MA Yan-hong;HONG Jie;CHEN Lu-lu

..............page:1523-1529

Effect of circumferential forward-skewed blade on aeroacoustic performance of axial fan
LI Yang

..............page:1606-1609

Impact of mainstream on the vortex flow of cavity in trapped vortex combustor
LI Rui-ming;LIU Yu-ying;LIU He-xia;YANG Mao-lin

..............page:1482-1487

Research on flow instability of transonic compressor rotor and boundary suction effect at low Reynolds number
XIA Qin-bin;WANG Ru-gen;ZHOU Min

..............page:1610-1615

Research on pedestal looseness fault of multi-disc over-hung rotor system
MA Hui;SUN Wei;REN Zhao-hui;WEN Bang-chun

..............page:1512-1517

guo ji xue shu jiao liu huo dong

..............page:插2

Heat shield position on infrared characteristics of a vectored nozzle
LIU You-hong;LIU Yu

..............page:1437-1442

Design and dynamic investigation on driving equipment of micro flapping flight
ZHANG Xi-jin;FANG Zong-de;YANG Xiao-hui

..............page:1666-1671

gridpro di er qi mian fei pei xun ban zai bei jing hang kong hang tian da xue ju ban

..............page:插1

Research on performance fault fusion diagnosis of aero-engine component
LU Feng;HUANG Jin-quan;CHEN Yu

..............page:1649-1653

Analysis of drags trait in three-dimensional sidewall hypersonic inlet
WEI Yong-bin;ZHANG Kun-yuan

..............page:1594-1600

Heat transfer enhancement within an internal passage by combinations of ribs and suction holes
SU Fu-bin;ZHU Hui-ren;GUO Tao;XU Du-chun

..............page:1500-1506

Experimental investigation of a solid/arc slot asymmetrical combined casing treatment
QIAN Yu-ping;LIU Jian-yong;LI Qiu-shi;LU Ya-jun

..............page:1633-1638

Effect 0f covering shelter on infrared radiation characteristics of helicopter infrared radiation suppressor
WANG Tong-hui;WANG Xian-wei;ZHANG Jing-zhou;SHAN Yong

..............page:1493-1499

Experimental study on thermal-Vibration test of thermal insulating component for cruise missile
WU Da-fang;ZHAO Shou-gen;YAN Zhen-qian;ZHAO Xing

..............page:1507-1511

Estimation of the unbalance magnitude of rotor system based on model
LI Chang-you;XU Min-qiang;GUO Song;WANG Yue-wu;WANG Ri-xin;GAO Jing-bo

..............page:1530-1536

Numerical investigation on gas flow in Laval micronozzle
LIU Zhao-miao;ZHANG Tan

..............page:1556-1563

Cold test of pulse thruster with high combustion chamber pressure
LIANG Shu-qiang;LIU Yu;QIN Li-zi;LIN Zhen

..............page:1661-1665

Numerical simulation of multi-phase combustion flow in solid rocket motors with metalized propellant

..............page:1654-1660

Performance comparison between the ramp injectors with different structures in supersonic combustion
WU Hai-yan;ZHOU Jin;WANG Hong-bo;SUN Ming-bo;ZHANG Shun-ping

..............page:1476-1481

Slip model for the plastic behavior of Ni base single crystal based on dual-phase microstructure cell
CAO Juan;WANG Yan-rong;SHI Duo-qi

..............page:1537-1543

Design of vapourization type combustion heater with high temperature and pressure
LI Ming;WU Er-ping;TANG Ming

..............page:1443-1448

Conceptual design of Mach number 3.5 air-breathing propulsion system
CHEN Min;TANG Hai-long;LIU Da-xiang;JIN Jie

..............page:1564-1569

Design of forecasting model for aero-engine lubrication debris support vector machines based on immune-particle swarm optimization algorithm
LI Ben-wei;ZHANG Yun;SUN Tao

..............page:1639-1643

Computed study on power recovery of turbocharged two stroke spark ignition engine at altitude
LIU Bo;DENG Kang-yao

..............page:1570-1576

Three-dimensional numerical research on stall inception in axial compressor
TU Bao-feng;HU Jun;ZHAO Yong

..............page:1616-1621

Numerical method for fluid-structure interaction in turbomachinery bladings
ZHANG Xiao-wei;WANG Yan-rong;ZHANG Xiao;PEI Wei

..............page:1622-1626