Journal of Solid Rocket Technology 2013 Issue 6 An ascent trajectory design method with constant dynamic pressure for RBCC powered vehicle

An ascent trajectory design method with constant dynamic pressure for RBCC powered vehicle
JIA Xiao-juan;,LV Shi;,YAN Xiao-dong;

..............page:711-714

Performance prediction of the interior trajectory in launch considering experiment of gas-generator in low-tempreture
BAO Fu-ting;,HUI Wei-hua;,LIU Yang;

..............page:715-719

Numerical simulation of three-dimensional turbulent combustion of the base bleed projectile
FENG Feng;,WU Xiao-song;,ZHUO Chang-fei;

..............page:720-726

Biglobal stability analysis for the side-induced flow in solid rocket motors
LIU Pei-jin;,WEI Shao-juan;,WEI Xiang-geng;,YANG Shang-rong;

..............page:727-730,747

Study on mixing process assessment method in solid ramjet
CHEN Bin-bin;,HU Jian-xin;,MA Li-kun;,WANG De-quan;,XIA Zhi-xun;,ZHAO Xiang-heng;

..............page:731-735

Numerical simulation of injection schemes in scramjet of RBCC engine
HE Guo-qiang;,QIN Fei;,TANG Xiang;

..............page:736-741

A method of quasi-one dimensional numerical analysis for solid fuel scramjet combustor performance
CHI Hong-wei;,WANG Li-he;,WANG Ning-fei;,WEI Zhi-jun;,WU Zhi-wen;

..............page:742-747

Analysis of fluid dynamic control model for pintle controlled solid rocket motor
BAO Fu-ting;,CHENG Chen;,LIU Yang;,XU Hao;

..............page:748-752

Numerical simulation of diaphragm rupture process of igniter in ignition process of solid rocket motor
CAO Jie;,CHEN Jun;,FENG Feng;,LI Hong-chao;,TANG Bi-shun;

..............page:753-757

Optimum design of nozzle used in wide mach number
CHEN Bing;,GONG Chun-lin;,GU Liang-xian;

..............page:758-762

Relationship between grain inner surface train and case strain
CHEN Ru-xun;,CHEN Yi;

..............page:763-765,794

Analysis of diffusion flame structure of solid composite propellant
CAO Yong-jie;,YE Rui;,YU Yong-gang;

..............page:766-770

Comparative research of tensile and compressive mechanical properties of HTPB propellant at low temperature
CHANG Xin-long;,HU Kuan;,LAI Jian-wei;,ZHANG Xiao-jun;

..............page:771-774

Effect of B4 C on ignition and combustion of boron particles
AO Wen;,CEN Ke-fa;,LIU Jian-zhong;,WANG Yang;,ZHANG Yan-wei;,ZHOU Hua;,ZHOU Jun-hu;

..............page:775-779

Effect of oxalic acid on ignition and combustion properties of B/AP complex fuels in mini-tubes
CEN Ke-fa;,LI He-ping;,LIU Jian-zhong;,WANG Yang;,XI Jian-fei;,YANG Wei-juan;,ZHOU Jun-hu;

..............page:780-785

Thermal stability of modified double base(MDB) propellant with high solid content by accelerating rate calorimeter
DING Li;,SONG Xiu-duo;,WANG Jiang-ning;,ZHANG Chao;,ZHENG Chao-min;

..............page:786-790

Study on new UV curing liner of solid rocket motor
DENG Jian-ru;,ZHANG Mo-han;,ZHANG Xi-long;

..............page:791-794

Technology exploration of molding processing for HTPB propellant
CHEN Xiao-ming;,ZHAO Ying;,ZHENG Lin;

..............page:795-798

Theoretical research and numerical simulation of winding tension design of hoop winding on cylindrical mandrel
LIANG Qing-bo;,XING Jing-zhong;,YANG Tao;

..............page:799-804,835

Effect of structure parameters of a new double wedge angle ring gasket on its seal contact pressure
LU Xiao-feng;,XU Yong-jie;

..............page:805-810

Microstructure characterization from X-ray micro-tomography and tensile failure mechanism of 4D in-plane carbon/carbon composites
SONG Le-ying;,XU Cheng-hai;,XU De-sheng;,XU Kai;

..............page:811-815

Effect of different kinds of silica on mechanism of peroxide crosslinking of EPDM rubber used in insulation
CHEN De-hong;,HU Wei;,LING Ling;,MA Xin-gang;,WANG Min;,WANG Ming-chao;,WU Qian;

..............page:816-821

Effect of plasma modification on the hygrothermal properties of carbon fiber/PEK-C composites
GUO Zhi-juan;,LI Wei;,YAO Shu-yong;,ZHAO Huan-wei;

..............page:822-825

Experimental research of damaging failure of variable-stiffness composite
DAI Wei-rong;,DU Yu;,LI Zhi-meng;,NIU Xue-juan;,YANG Tao;

..............page:826-830

Performance prediction of carbon fiber/epoxy resin composite material under influence of temperature
CHEN Ru-xun;,FAN Yu;,YE Ding-you;

..............page:831-835

Impact damage detection of composites based on ultrasonic thermography technique
LUO Wen-yuan;,TIAN Gan;,WANG Dong-dong;,YANG Zheng-wei;,ZHANG Wei;

..............page:836-841

A method for monitoring the curing process of HTPB liner in real-time
WANG Zhao-ba;,YANG Ya-jun;

..............page:842-846