1004-5635
2004 Issue 3
..............page:49-54
The Application of CCPP (Combined Cycle Power Plant) Technology with Low- calorific Value Gas in Iron & Steel Plants
yang ruo yi ; liu wen he
yang ruo yi ; liu wen he
..............page:43-48
The Research for the Grain Size Corrosion Method of 300M Steel
wang chang jian ; wang gang
wang chang jian ; wang gang
..............page:13-16
The Heat Cracking of the High Manganese Casting Steel Affected by the Chemical Composition
wang zhong zuo
wang zhong zuo
..............page:10-12
The Analysis of the Detected Defects on the Ring Welded Seam of Hydrogenated Cylindrical Shell
jiang ping ; shao kui xiang
jiang ping ; shao kui xiang
..............page:8-9
The Research for the Numerical Simulation of the Hot Formation New Process of Mn18Cr18N Retaining Ring Steel
yang chao cao ; liu jian sheng ; chen hui qin ; guo hui guang ; ding yu ; liu zhi ying
yang chao cao ; liu jian sheng ; chen hui qin ; guo hui guang ; ding yu ; liu zhi ying
..............page:5-7
The Experimental Research for the Hot Distortion Characteristics of Mn18Cr18N Steel
wu jian guo ; guo hui guang ; liu jian sheng
wu jian guo ; guo hui guang ; liu jian sheng
..............page:1-4
The Development of the Cold Work Roll Material and Its Manufacturing Technique
zhao xin ; li wen ping ; liu de fu ; zhao yi
zhao xin ; li wen ping ; liu de fu ; zhao yi
..............page:38-42,48
The Upgrading of the Final Heat Treatment Process for the Generator Shaft End
zhang chong hui ; zhang yong sheng
zhang chong hui ; zhang yong sheng
..............page:35-37
..............page:32-34
The Upgrading of the Forging Process for the Small Type Shaft with Thin Wall Thickness
han lei ; sun zhi gang
han lei ; sun zhi gang
..............page:28-31,34
The Forging Forming Process for the 20T Bidirection Hook
sun zhi gang ; han lei ; yang zhi hong
sun zhi gang ; han lei ; yang zhi hong
..............page:23-27,37
The Development and Application of the Casting Defect Repair Welding Machine
wang jin sheng ; yin sheng yi
wang jin sheng ; yin sheng yi
..............page:21-22
..............page:17-20