Journal of Materials Science & Technology 2008 Issue 1 Microstructural Evolution in Directionally Solidified Ni-Base Superalloy IN792+Hf

Microstructural Evolution in Directionally Solidified Ni-Base Superalloy IN792+Hf
S.M. Seo;I.S.Kim;J.H. Lee;C.Y. Jo;H. Miyahara;K. Ogi

..............page:110-114

Effect of Annealing Atmosphere on the Mechanical Property of Free-cutting Phosphor Bronze Alloy
Byoung-Soo Lee;Hoon Cho;Hyung-Ho Jo

..............page:115-119

Influence of Aging Treatment on the Mechanical and Electrical Properties of Cu-0.5%Be Alloy
Min Ryou;Byoung-Soo Lee;Myung-Ho Kim

..............page:120-122

Effect of Applied Pressure on the Joining of Combustion Synthesized Ni3Al Intermetallics with Al Alloy
G.S. Cho;J.H. Yang;K.H. Choe;K. W. Lee;A.Ikenaga

..............page:123-126

Evaluation the Properties of Titanium Matrix Composites by Melting Route Synthesis
Bong-Jae Choi;Si-Young Sung;Myoung-Gyun Kim;Young-Jig Kim

..............page:105-109

Fabrication and Properties of SiB6-B4C with Phenolic Resin as a Carbon Source
G.C. Hwang;J. Matsushita

..............page:102-104

Effect of Sb Addition on Microstructure and Mechanical Properties of Al18B4O33/AS52 Magnesium Matrix Composites
Wookjin Lee;Ikmin Park;Yongho Park

..............page:99-101

Mg-Al Alloys Manufactured by Casting and Hot Working Process
J.M.Kim;J.H. Jun;W.J. Jung

..............page:96-98

Gating System Design for a Magnesium Alloy Casting
Zhizhong SUN;Henry HU;Xiang CHEN;Qigui WANG;Wenying YANG

..............page:93-95

Microstructures and Mechanical Properties of Rapidly Solidified Mg-Al-Zn-MM Alloys
Yeon-Wook Kim

..............page:89-92

Microstructure and Mechanical Properties of Mg-Al-Ca-Nd Alloys Fabricated by Gravity Casting
Hyeon-Taek Son;Jae-Seol Lee;Ik-Hyun Oh;Chang-Seog Kang

..............page:85-88

Aging Behavior of Mg-Y-Zr and Mg-Nd-Zr Cast Alloys
Yang-Do Kim;Nam-Hyun Kang;Il-Guk Jo;Kyung-Hyun Kim;In-Bae Kim

..............page:80-84

Effect of Injection Velocity on Structure Part Characteristic in AZ50 Die Casting Process with High Vacuum System
S.M. Lee;P.K. Seo;C.G.Kang

..............page:75-79

Evaluation of Alpha-case in Titanium Castings
Si-Young Sung;Bong-Jae Choi;Beom-Suck Han;Han-Jun Oh;Young-Jig Kim

..............page:70-74

Thin-Wall Aluminum Die-Casting Technology for Development of Notebook Computer Housing
Chang-Seog Kang;Jae-Ik Cho;Chang-Yeol Jeong;Se-Weon Choi;Young-Chan Kim

..............page:65-69

Study of the Interface between Steel Insert and Aluminum Casting in EPC
K.H. Choe;K.S.Park;B.H. Kang;G.S. Cho;K.Y. Kim;K.W. Lee;M.H. Kim;A.Ikenaga;S. Koroyasu

..............page:60-64

Properties of Dispersion Casting of Y2O3 Particles in Hypo, Hyper and Eutectic Binary Al-Cu Alloys
J.J.Park;G.H. Kim;S.M. Hong;S.H. Lee;M.K. Lee;C.K. Rhee

..............page:57-59

Effect of Process Parameters on Morphology and Grain Refinement Efficiency of TiAl3 and TiB2 in Alumimum Casting
Prapas Kunnam;Chaowalit Limmaneevichitr

..............page:54-56

Ageing Behavior of Mg-xAl-Zn with Variation of Al Content
Byoungho Kim;Jongjin Jeon;Yeongdo Park;Yongho Park;Ikmin Park

..............page:51-53

Microstructure and Mechanical Properties of Hyper-eutectic Al-Si Alloys Fabricated by Spray Casting
Min Ryou;Chul-Hyun Kim;Myung-Ho Kim

..............page:48-50

Modification of β-Al5FeSi Compound in Recycled Al-Si-Fe Cast Alloy by Using Sr, Mg and Cr Additions
Witthaya Eidhed

..............page:45-47

Hot-Dip Coating of Lead-free Aluminum on Steel Substrates with Ultrasonic Vibration
Y. Tsunekawa;S. Tamura;M. Okumiya;N. Ishihara

..............page:41-44

Effect of Aging Treatment on Microstructural and Mechanical Characteristics of PEO Coatings on Mg-Al Alloy
S.Y. Chang;Y.L.Kim

..............page:37-40

Microstructure, Elastic Modulus and Tensile Properties of Ti-Nb-O Alloy System
H.S. Kim;T.Y. Ra;I.D. Yeo;H.J. Bang;Y.G. Yoo;W.Y. Kim

..............page:33-36

Effects of Solution Treatment Time and Sr-Modification on Microstructure and Mechanical Property of Al-Si Piston Alloy
Witthaya Eidhed

..............page:29-32

Effect of Alloying Element Antimony on Macrostructural and Microstructural Development in A356 Alloy Directionally Solidified under Unsteady-state Conditions
Supparerk Boontein;Julathep Kajornchaiyakul;Chaowalit Limmaneevichitr

..............page:25-28

Effects of Cr and Cr/Mn Combined Additions on Semi-Solid Microstructures of Al-Mg-Si Alloys Produced by D-SSF Process
Witthaya Eidhed;Hiroyasu Tezuka;Tatsuo Sato

..............page:21-24

Effect of Sc on Precipitation Hardening of AlSi6Mg Alloy
Wattanachai Prukkanon;Satit Chanpum;Chaowalit Limmaneevichitr

..............page:17-20

Development of Deformation-Semisolid-Casting (D-SSC) Process and Applications to Some Aluminum Alloys
Tatsuo Sato

..............page:12-16

Plasma Post Oxidation of Plasma Nitrocarburized SKD 61 Steel
Insup Lee;Kwang-Ho Jeong

..............page:136-138

Mold Filling and Prevention of Gas Entrapment in High-pressure Die-casting
Itsuo Ohnaka;Akira Sugiyama;Takashi Ikeda;Hideyuki Yasuda

..............page:139-140

Preparation of Pure Copper Powder from Acidic Copper Chloride Waste Etchant
H.S. Hong;M.S.Kong;J.K. Ghu;J.K. Lee;H.G.Suk

..............page:141-142

Effect of Cristobalite and Quartz on the Properties of Gypsum Bonded Investment
Yun-Jong Kim;Sang-Bae Kim;Hyun-Hye Park;Myeong-Deok Seo;Byoung-Cheon Lee;Man-So Han;Taik-Nam Kim;Sung-Baek Cho

..............page:143-144

Heat Transfer and Acoustic Properties of Open Cell Aluminum Foams
Bokhyun KANG;Kiyoung KIM;Byungmin LEE;Jaesoo NOH

..............page:1-6

Effect of Squeeze Cast Process Parameters on Fluidity of Hypereutectic Al-Si Alloy
Jong-Kyu Baek;Hae-Wook Kwon

..............page:7-11

Microstructural Stability of a Single Crystal Superalloy DD8 during Thermal Exposure
K.Y. Cheng;D.H. Kim;Y.S. Yoo;C.Y. Jo;T. Jin;Z.Q.Hu

..............page:127-130

Heat Transfer between Casting and Dieduring High Pressure Die Casting Process of AM50 Alloy-Modeling and Experimental Results
Zhipeng GUO;Shoumei XIONG;Sang-Hvun Cho;Jeong-Kil Choi

..............page:131-135