Foundry Technology 2007 Issue 6 zhu zao sheng chan guo cheng zhong de fei qi wu xun huan zai li yong

zhu zao sheng chan guo cheng zhong de fei qi wu xun huan zai li yong
yu yong lai

..............page:723-727

..............page:728-736

Research on the Dummy Bar of Austempered Ductile Iron
ZHANG Jin;MAO Wei-min;BIAN Dun-ting

..............page:737-740,744

Effect of Composition and schedule on Graphite Floatation in Nodular Graphite Cast Iron
WANG Li-ping;GUO Er-jun;CHEN Hong-bin;REN Shan-zhi;LI Da-Yong

..............page:741-744

Research on a New Type of Inoculant of High Strength Gray Iron
ZI Shu;WU Guo-wei;ZHANG Guo-chen;BAI Bo

..............page:745-750

Principe and Vibration Parameters Optimization of Powder Removing Iron Machine
WANG Zhong;WANG Xu-ran;FENG Xiao-ming;CHEN Li-gui

..............page:751-753

Automatic Controlled System for 100t High Impedance Electric Arc Furnace
LU Hai-yan;HAN Xing

..............page:754-757

Optimum Design on Cooling Framework of Mold Copper Plate
HAN Zhi-wei;FENG Ke;WANG Yong;MAO Jing-hua

..............page:856-858

Investigation on As Cast Ductile Iron Containing Chromium (ACDICC)——Microstruc Ture And Mechanical Properties of ACDICC (Part Ⅰ)
RAO Qun-zhang;WAN Ren-fang;ZHANG Yuan-hao;LIANG Sheng-wen;ZENG Da-xin;WU Bing-huan;HE Han-jun;LI Huai-jun

..............page:847-855

Hydrodynamic Simulation and Optimization Study on the Casting Technique of Huge Aluminum Alloy Castings
LIU Bo

..............page:842-846

Influence of Ce, Ca and Sr Alloying Addition on As-cast Microstructure of AZ91 Magnesium Alloy
WANG Hui-yuan;LIU Sheng-fa

..............page:838-841

Study on Casting Infiltration of High Manganese Steel in EPC Process
CHENG Jun;GUO Chang-qing

..............page:835-837

Research on Technology of Producing Granular Ferroalloys Using Continuous Casting with Crystallizer
ZENG Shi-lin;CHU Shao-jun;JIA Yan-hua

..............page:831-834

Research On Horizontal Heated Mold Continuous Casting Equipment under Conditions of Vacuum Melting and Argon Shield
DING Yu-tian;LIU Jian;CHEN Wei-hua;HU Yong;XU Guang-ji;KOU Sheng-zhong

..............page:827-830

Effect of Al and Cu Content on Properties of Zn-Al-Cu-Mg Alloy
LIU Hong-jun;LI Ya-min;HAO Yuan

..............page:823-826

Role of Zirconium in Magnesium and Magnesium Alloys
CHEN Zeng;ZHANG Mi-lin;LV Yan-zhuo;HAN Wei;TANG Ding-xiang

..............page:820-822,846

Investigation of High Chromium Cast Iron Roller by Centrifugal Casting
XIA Peng-ju;YAN Zhu-mei;FENG Xiao-ming;ZHANG Jian-zhong

..............page:816-819

Development of Large Counter Gravity Casting Equipment with Melt-transport System
LI Xin-lei;HAO Qi-tang;JIE Wan-qi

..............page:812-815

Effect of Reciprocating Extrusion on the Microstructures and Properties of Mg2Si Reinforced Mg-Al based Composite
ZHANG Zhong-ming;MA Ying;XU Chun-jie;JIA Shu-zhuo

..............page:808-811

Effects of Austenitizing Temperature on Properties and Microstructures of ZG30MnCrSi Isothermal Quenched
LIU Xiang-dong;ZHANG Guo-jun;CHE Guang-dong;YAN Shu-fang;LI Jin-fu

..............page:804-807

Effects of Equal Channel Angular Pressing and Subsequent Annealing Treatment on Fe-Mn Damping Alloy
DING Sheng;LI Ning;WEN Yu-hua;HUANG Shu-ke;ZHANG Wei

..............page:800-803

Study on the Interfacial Microstructures of In-situ TiB2/Al Composites
WANG Min;GAO Jian-jun;CHEN Shou-xin

..............page:796-799

Microstructure and Mechanical Properties of (TiB+Nd2O3)/Ti Composites
XIAO Dai-hong

..............page:791-795

Study on Thermal Deformation of High Chromium Cast Iron Prepared by Solid-liquid Mixed Casting Process
HE Jian-jun;CHEN Zhen-hua;CHEN Jian;CHEN Kui

..............page:787-790

Research of Microstructures and Aging Properties of CuCr25RE Contact Materials Melted in Atmosphere
ZHU Jian-juan;TIAN Bao-hong;LIU Ping;REN Feng-zhang;XIA Cheng-dong

..............page:784-786

Fabrication of Thermal Resistant Surface Composite Coating on Cast Steel
WANG Feng;WANG Shu-qi;CUI Xiang-hong;CHEN Kang-min;JIN Hua-jun;YANG Yong-tao

..............page:779-783

Preparation of Nanocrystalline Nickel Powders by High Energy Ball Milling
LU Cheng-jie;ZHANG Zhen-zhong;ZHOU Jian-qiu;ZHANG Shao-ming

..............page:775-778

Solidification Structures of Undercooled Fe-80at% Ni Melts
XIE Hui;SUN Jun;BAI Guang-hai;JIA Lei;LIU En-ke

..............page:771-774

Variation of Liquid Composition and its Effects on Relative Rayleigh Number during Solidification of Two Kinds of Ni-Cr-Co based Superalloys
WANG Ling;DONG Jian-xin;ZHANG Mai-cang;ZHENG Lei

..............page:766-770

Effect of Cr and Mo on High-Temperature Wear Behavior of Cast Hot-Forging Die Steels
LI Xiao-yan;WANG Shu-qi;CUI Xiang-hong;WANG Feng

..............page:761-765

Measurement of Solid-liquid Interfacial Energy of Succinonitrile
WANG Li-lin;WANG Fang-zhi;LIN Xin;WANG Meng;HUANG Wei-dong

..............page:758-760

zhong guo zhu zao xie hui zhu zao xing ye ji shu gai zao hui yi bao gao zhu zao qi ye de ji shu gai zao
zhang bo ming

..............page:721-723

Research on Laser Surface Modification of Copper Alloy
GUO Xiao-qin;ZHANG Wei-guo;WANG Jin-feng

..............page:859-861

Research and Progress on Twin-roll Thin Strip Continuous Casting Technology for Magnesium Alloys
YANG Ming-bo;PAN Fu-sheng;DING Pei-dao;JIANG Bin

..............page:862-866

Combination of Enterprises with Higher Educational Institutions to Promote the Technological Innovation for Small and Medium Enterprises
XIAO Ya-hang

..............page:867-869

Rapid and Economic Method to Produce Core by Cold-Setting Sand
CHEN Da-sheng

..............page:870-871

Controlling on the Quality of Centrifugal Roll Surface of Nadular Cast Iron
ZHANG Yin-hai;ZHANG Zhao-long;XU Xiao-kun

..............page:871-872

Practice of Improving the Life of Acid Induction Furnace Liner
CHEN Shu-ying;WANG Xian-li;FU Qiang;LI Zhi-xiang;MA Li-guo;HUI Xiao-feng;GUO Jian-hua

..............page:872-874

Practice of Metallurgical Casting for the Grate
HUO Bai-zhen;LI Gang;ZHU Xi-jun;LI Tie;LI Wen-zhe;WANG Yun-long

..............page:874-876