Journal of Central South University 2008 Issue 3 Model of vertical vibration of train and floating slab track system in urban rail transit system

Model of vertical vibration of train and floating slab track system in urban rail transit system
XIANG Jun;WANG Yang;HE Dan;KONG Fan-bing;GUO Gao-jie

..............page:596-601

Properties of cement-based material mixed with grounded slag powder due to sulfate attack at low pH value
XIAO Jia;TANG Xian-yan

..............page:602-607

Nonlinear finite element analysis of reinforced concrete columns in fire
DING Fa-xing;YU Zhi-wu;OU Jin-ping

..............page:608-614

Effect analysis of structural parameters of critical pier height on T-shape rigid frame bridge with high pier and long span
OU Li;YE Mei-xin;CHEN Jia

..............page:615-622

Bi-level programming model for urban rail transit network's layout
CHEN Qun;SHI Feng;LONG Ke-jun

..............page:623-628

Dynamic analysis of transversely isotropic shallow spherical shells of Winkler foundation subjected to impact force
WEN Ming-cai;DAI Zhen-dong

..............page:629-634

zhong nan da xue xue bao ( zi ran ke xue ban ) lai gao xu zhi

..............page:封3

Influence of particle failure on strength of SiCp/Al composites
CHEN Kang-hua;FANG Ling;LI Xia;HUANG Da-wei;FANG Hua-chan

..............page:493-499

Mechanical properties of C/C-SiC composites by compression molding
XIONG Xiang;KUANG Wen-min;XIAO Peng;YANG Yang;JIANG Si-zhou

..............page:486-492

Preparation of norfloxacin-chitosan mierosphere and its drug release property
XUE Changgang;TONG Chun-yi;XIAO Su-yao;WANG Bei;YU Dan-mi;TANG Dong-ying;LIU Xuan-ming

..............page:480-485

Inclusion between β-cyclodextrin derivatives and naproxen
CHEN Yuan-yuan;LIU Jia-jia;TANG Ke-wen;ZHANG Wen-ling

..............page:474-479

Electrochemical-capacity of nanostructure manganese dioxide
ZHANG Ying;LIU Kai-yu;ZHANG Wei;WANG Hong-en

..............page:469-473

Properties and structure of polyaniline co-doped with multiple functionalized sulfonic acids
MA Li;HUANG Ke-long;CHEN Chao;LU Wei;CHEN Feng-qiang

..............page:464-468

Dynamic operating characteristics for adsorption refrigeration
YANG Pei-zhi;CHEN Huan-xin

..............page:459-463

Control and simulation of ground pressure evolutional process based on reconstructed mining environment and continuous caving method
ZHOU Ke-ping;ZHU He-ling;XIAO Xiong;CHEN Qing-fa

..............page:417-422

3D visualization modeling on geological and mining engineering in a large-sized mine
ZHOU Zhi-yong;CHEN Jian-hong;YANG Li-bing

..............page:423-428

Technology of blast-induced caving roof and its application in No.92 orebody of Daehang Tongkeng Mine
ZHANG Shi-chao;ZHOU Ke-ping;HU Jian-hua;SU Jia-hong;GU De-sheng

..............page:429-435

Sintering bed temperature distribution model based on heat transfer
LONG Hong-ming;FAN Xiao-hui;MAO Xiao-ming;JIANG Tao;CHEN Xu-ling

..............page:436-442

Bio-reduction of Cr(Ⅵ) by Leucobacter and element analysis of reduction products
ZHU Wen-jie;LONG Huai-zhong;YANG Zhi-hui;CHAI Li-yuan

..............page:443-447

Preparation and characterization of PtRuP/C catalysts
YANG Zhi-kuan;WANG Yao-wu;XIE Xiao-feng;GUO Jian-wei;HU Guo-rong

..............page:448-453

Formation mechanism of magnetite prepared by air oxidation
YANG Xi-yun;GONG Zhu-qing;PENG Chang-hong;CHEN Bai-zhen;XU Hui;SHI Xi-chang

..............page:454-458

Hydrocarbon pool forming conditions of paleozoic buried hill in peripheral of Nanpu sag
CHENG Yongs-heng;CHEN Song-ling

..............page:590-595

Wavelet preprocessing of analog circuit fault signal
PENG Wei-shao;LI Li-zheng;HU Yan-yu

..............page:584-589

Real-time optimal path planning for mobile robots based on immune genetic algorithm
CHEN Xi;TAN Guan-zheng;JIANG Bin

..............page:577-583

A discrete particle swarm optimization algorithm for task assignment problem
WANG Ya-lin;WANG Ning;YANG Chun-hua;GUI Wei-hua

..............page:571-576

Nonlinear intelligent correction of pressure transducer from air intake pipe in gasoline engine
JIANG Shou-sheng;E Jia-qiang;GONG Jin-ke;YUAN Wen-hua

..............page:566-570

Modeling dynamics analysis of multiple articulated lifting system
XU Yan;ZHANG Wen-ming;FENG Ya-li

..............page:560-565

Comparison of aerodynamic performance of passenger train traveling on different railway conditions up strong cross-wind
ZHOU Dan;TIAN Hong-qi;YANG Ming-zhi;LU Zhai-jun

..............page:554-559

Flow stress behaviors of 42CrMo steel during hot compression
LIN Yong-cheng;CHEN Ming-song;ZHONG Jue

..............page:549-553

Effect of hydraulic pressure loading paths on forming of automobile panels based on numerical simulation
LIU Xiao-jing;YAN Wei;DAI Hong-qing

..............page:543-548

Preparation of Ni-Cr/BN sell-lubricating composites by active sintering process
YU Kun;YANG Zhen;WANG Ri-chu;TAN Ying-guo

..............page:538-542

Effects of aging temperature on microstructures and mechanical properties of Al-5.06%Cu-0.44%Mg-0.55%Ag- 0.30%Mn-0.17%Zr alloy
LIU Yan-bin;LIU Zhi-yi;LI Yun-tao;XIA Qin-kun;ZHOU Jie;DUAN Shui-liang

..............page:532-537

Effects of Fe and Si on microstructures and mechanical properties of 2519 aluminum alloy
LI Hui-zhong;LIANG Xiao-peng;ZHANG Xin-ming;HUANG Bai-yun;ZHANG Chuan-fu

..............page:527-531

Nanocrystallization and microstructure of (FeCo)73.5Cu1Nb3Si13.5B9
LI Li-ya;YI Jian-hong;GE Yi-cheng;PENG Yuan-dong

..............page:522-526

Wet friction properties of copper-based material via powder metallurgy
WANG Xiu-fei;HUANG Qi-zhong;YIN Cai-liu;TAN Rui-xuan;NING Ke-yan;WU Cai-cheng

..............page:517-521

Influences of liquid oxidation treatment on surface structure of carbon fiber
XU Xianfeng;XIAO Peng;XU Lin;XIONG Xiang

..............page:512-516

Form mechanism of cracks in fabricated process of C/C-SiC frictional composites through warm compacted-in situ reacted process
LI Zhuan;XIAO Peng;XIONG Xiang;YANG Yang;KUANG Wen-min

..............page:506-511

Thermal conductivity properties of carbon/carbon composites with thin felt laminate at high temperature
XU Hui-juan;XIONG Xiang;YI Mao-zhong;HUANG Bai-yun;WANG Hui

..............page:500-505