1001-4888
2013 Issue 2
Inversion Identification Method and Mechanical Characterization Based on Experimental Data
ZHANG Qian1;WANG Juan2;KANG Yi-lan1
ZHANG Qian1;WANG Juan2;KANG Yi-lan1
..............page:141-150
Fabrication and Application of Microscale Deformation Carrier based on FIB
ZHU Jian-guo1;2;LI Yan-jie1;WANG Qing-hua1;XIE Hui-min1
ZHU Jian-guo1;2;LI Yan-jie1;WANG Qing-hua1;XIE Hui-min1
..............page:151-157
Pitch Error Analysis of High-frequency Grating based on Sampling Moiré Method
WANG Zhu-lin1;LEI Zhen-kun1;ZHAO Yan-ru2
WANG Zhu-lin1;LEI Zhen-kun1;ZHAO Yan-ru2
..............page:158-165
Study of the Influence of Horizontal Oil-Water Two-Phase Flow Pattern on the Impedance Moisture Meter
XU Ming1;ZHAO Tie-zhu2;NI Li2;YU Yong-bo2;LIU Xing-bin2;YANG Ji-ming1
XU Ming1;ZHAO Tie-zhu2;NI Li2;YU Yong-bo2;LIU Xing-bin2;YANG Ji-ming1
..............page:166-172
Two-Dimensional Gapped Smoothing Method for Impact Damage Detection of Composite Laminates
FENG Kan1;Xiaojing Gong2;Olivier Sicot2;LI Zheng1;l′Institut Supérieur de l′Automobile et des Transports;University of Burgundy;France 21078)
FENG Kan1;Xiaojing Gong2;Olivier Sicot2;LI Zheng1;l′Institut Supérieur de l′Automobile et des Transports;University of Burgundy;France 21078)
..............page:173-179
On the Application of Photoelasticity-Digital Speckle Correlation Hybrid Method in Separation of Main Stress Photoelastic Fringes
LI Bin1;YANG Guo-biao1;2
LI Bin1;YANG Guo-biao1;2
..............page:180-186
Experimental Investigation on Compression Failure Mechanism of Composite Laminates with Impact Damage Based on Acoustic Emission
CHEN Xia;XIAO Ying-chun
CHEN Xia;XIAO Ying-chun
..............page:187-192
Experimental Research on Quasi-static Mechanical Behaviors of Thin Circular Plate of Pseudo-elastic TiNi Alloy
CUI Shi-tang;TANG Zhi-ping
CUI Shi-tang;TANG Zhi-ping
..............page:193-198
On the Proper Orthogonal Decomposition Technique for PIV Post-Processing
GAO Qi;WANG Hong-ping
GAO Qi;WANG Hong-ping
..............page:199-206
Numerical Simulation and Experimental Investigation on Wing Disc Variable Speed Motion of a Biomimetic Propulsion Device
GUO Shao-yan1;LV Jian-gang1;BAI Xiang-hua1;DAI Fu-long2;GAO Fei1
GUO Shao-yan1;LV Jian-gang1;BAI Xiang-hua1;DAI Fu-long2;GAO Fei1
..............page:207-212
On the Non-Destructive Testing for Defects Caused by Electronic Package Based on Infrared Thermal Imaging
QIN Fei;LIU Cheng-yan;BAN Zhao-wei
QIN Fei;LIU Cheng-yan;BAN Zhao-wei
..............page:213-219
On the Dynamic Compressive Mechanical Properties and Strain Rate Related Constitutive Model of PMMA Material
XIE Zhong-qiu;ZHANG Peng-peng
XIE Zhong-qiu;ZHANG Peng-peng
..............page:220-226
Study of Bond Performance between Steel Bar and Recycled Aggregate Concrete Subjected to Freeze-Thaw Cycling
AN Xin-zheng1;YI Cheng2;WANG Xiao-xue1;JIANG Xin-pei1
AN Xin-zheng1;YI Cheng2;WANG Xiao-xue1;JIANG Xin-pei1
..............page:227-234
An Experimental Study of Cutting Resistance in Simulated Shield Tunneling
LIN Shi-xiang;HOU Zhen-de;WANG Yi-hang;CHEN Chao;YUE Cheng;WANG Yan-qun
LIN Shi-xiang;HOU Zhen-de;WANG Yi-hang;CHEN Chao;YUE Cheng;WANG Yan-qun
..............page:235-241
Experimental Study of Soft Rock Similar Material by using Mixture of Asphalt and Sea Sand
WANG Yong-yan;LI Jian-guang
WANG Yong-yan;LI Jian-guang
..............page:242-246
A Novel Experimental Setup for Explosively Loaded Expanding Ring Test
TANG Tie-gang;LIU Cang-li
TANG Tie-gang;LIU Cang-li
..............page:247-254
On the Influence of Wing Aerodynamic Surface on the Grid Fin Drag Reduction
TAN Xian-zhong1;DENG Fan2;CHEN Shao-song1
TAN Xian-zhong1;DENG Fan2;CHEN Shao-song1
..............page:255-260
Investigation on Blocking Effect of High-Rise Building in Wind Tunnel Experiment
WANG Lei;LIANG Shu-guo;ZOU Liang-hao;WANG Shu-liang
WANG Lei;LIANG Shu-guo;ZOU Liang-hao;WANG Shu-liang
..............page:261-268
Determination of Mode I Stress Intensity Factors by Digital Speckle Correlation Method
DAI Shu-hong1;2;MA Sheng-li2;PAN Yi-shan1;WANG Hong-shan1
DAI Shu-hong1;2;MA Sheng-li2;PAN Yi-shan1;WANG Hong-shan1
..............page:269-276