Plastics 2016 Issue 2 Needleless Spiral Roll Electrospinning of Poly (Vinyl Alcohol) Nanofiber

Needleless Spiral Roll Electrospinning of Poly (Vinyl Alcohol) Nanofiber
CHEN Hongbo;,TAN Jing;,SHA Yang;,LI Haoyi;,DING Yumei;,YANG Weimin;

..............page:1-3,7

Preparation and Rheological Properties of Polypropylene/Poly (butylenes terephthalate) In-Situ Fibrillation Composite
LUO Yiwei;,XIN Chunling;,LI Xiaogang;,HE Yadong;

..............page:4-7

Effect of Process Parameters on Precision of Surface Micro-Structures Molded by Injection-Compression Moulding
ZHANG Zhirui;,ZHENG Xiuting;,WU Daming;,LIU Ying;

..............page:8-10

Properties of LLDPE via the Micro-nano Laminating Technology
LIU Chenglin;,YANG Weimin;,JIAO Zhiwei;,LI Changjin;

..............page:11-13

Effect of Solvent on Melt Extrusion Processing Behaviors of Polyvinyl Fluoride Resin
QI Hao;,ZOU Wei;,DU Zhongjie;,LI Hangquan;,WANG Huirong;,ZHANG Chen;

..............page:14-16,22

Influence of Main Technological Parameters on Flowing and Mixing Performance in Triple-Screw Extruder
TAO Jin;,XIN Chunling;,YAN Baorui;,HE Yadong;

..............page:17-22

Three-Dimensional Non-isothermal Numerical Simulation of PA6/EPDM Composite Co-extrusion Process
DAI Kuntian;,AN Ying;,ZENG Yue;,CHENG Xiang;,YANG Weimin;,JIAO Zhiwei;

..............page:23-26,33

Effects of Temperature on Properties of PEEK / MWNTs Composite
GUO Xiaohong;,WANG Zhi;,CHEN Jian;,ZHANG Xu;,XU Yanying;,SI Qingmin;

..............page:27-29

Preparation of Imide β-Nucleating Agent and Effect on Properties of Polypropylene
QIAN Wei;,GUO Shaohui;,WANG Jiaqi;,ZHENG De;,QIAN Yuying;,CHEN Jun;

..............page:30-33

Mechanical Properties and Crystallization Behaviors of PBT/ABS-g-MAH Blends
LI Xin;,LIU Qiaobin;,SUN Jinpeng;,RUN Mingtao;,SONG Hongzan;

..............page:34-36

Preparation and Properties on Extrusion Foamed Sheet of Starch/PVA Composite
ZENG Guangsheng;,ZHANG Li;,HUANG He;

..............page:37-39,43

Synergistic Flame Resistant Effect of Nano-CaCO3/IFR on Polypropylene Foams
LI Chixiang;,JIANG Xiulei;,LIU Tao;,ZHAO Ling;

..............page:40-43

Exploration on Poly(Phenylene Sulfide) Waste Recycling
YU Yang;,ZHANG Tianjiao;

..............page:44-46

Preparation and Properties of HDPE/POE/Inorganic Particle Composite
LI Jing;,WAN Tong;

..............page:47-50

Toughening and Flame Retardant of High Impact Polystyrene
LIU Zhenyang;,CHUAI Chengzhi;

..............page:51-53

Flame Retardancy and Curing Properties of 2-Carboxyethyl(Phenyl) Phosphinic Acid in Epoxy Resin
CHENG Zhenning;,WANG Lingfeng;,LI Hao;,ZHU Xianhong;,CAI Shaojun;

..............page:54-57

Data and Chemical Structure Analysis of Polyester Modification
SUN Shuting;,ZHAO Yejun;,HUANG Guanbao;

..............page:58-60,68

Relationship Between Structure and Synthesis Process of Amino Resin
ZHANG Zhan;,XIAO Heping;,CAO Dawei;,CHEN Hongzu;,ZHAN Maosheng;

..............page:61-64

Preparation and Characterization of Poly (L-lactic acid) (PLLA)/Poly (ethylene oxide) Blends
YANG Chunfang;,XIONG Zujiang;,MENG Lingyan;,LIANG Ningning;,ZHANG Xiuqin;

..............page:65-68

Effect of Compatilizers Contents on Foaming and Mechanical Properties of PET/iPP Blend
QI Yuanhui;,SUN Jing;,MA Yanhong;,DONG Jiahao;,LUO Zhu;,WEI Liangqiang;

..............page:69-72

Rheological, Compression and Bubbles Morphology of EVA/Wood Powder Composite Foam
CHEN Lang;,OU Yanglong;,WU Wenzong;,SHI Pu;

..............page:73-76

Effect on Extending Chain Reaction and Mechanical Property of r-PETG in the Presence of Triphenyl Phosphite
ZHOU Feng;,ZHANG Yuehang;,LYU QI;,CUI Meijie;,YAN Haibiao;

..............page:77-80

Analysis Structure of Metallocene Linear Low Density Polyethylene
GUO Haifeng;,LI Yan;,JIANG Jinxian;

..............page:81-83

Specific Material of Silane Grafted PE Functional Film
DAI Yajie;,QIN Jiujia;,ZHANG Wenlong;

..............page:84-86

Structure and Properties of LDPE Prepared by Mechanically Stimulated Dynamic Extruder
LIANG Xiaotong;,YANG Li;,HU Jie;,WEI Xiaosong;,QU Jinping;

..............page:87-90

Research Progress on Bismaleimide Resin Modifications
LI Zeshuai;,ZHAO Xiongyan;,WANG Xin;,LI Shuang;

..............page:91-94

Toughening Research Progress in Completely Biodegradable Polylactide by Blending
DING Zheng;,LIN Qiang;,PENG Shaoxian;,ZHAO Xipo;

..............page:95-97,105

Key Technology for Lightweighting of New Energy Vehicle
XIAO Yong;,DING Yumei;,QIN Liu;,CHENG Xiang;,YU Huachun;,YANG Weimin;

..............page:98-100

Design of Coat-Hanger Die with Entrance Radius as Parameter and Its Numerical Verification
WANG Hehui;,ZHU Wenmin;,WANG Chaoping;,LU Pangu;,SI Yuanxiang;

..............page:101-105

Design of Four Plate Injection Mold of Spherical Parting Surface for Plastic Barrelhead
LIANG Yan;,ZHAO Jian;,HUO Yuda;,REN Yiming;,QU Minjie;,WU Lihao;

..............page:106-108

Optimization of Gating System for Plastic Tank Head Based on Moldex3D
LIU Miaomiao;,AN Ying;,YANG Weimin;,DING Yumei;,XIE Pengcheng;

..............page:109-112

Intelligent Self-tuning PID Loop Control System for Injection Molding Machine
LUO Haibo;,YANG Dafei;

..............page:113-116

Analysis and Optimization with CAE for Two-Component Injection Mould Hot Runner System of Automobile Grille
HONG Jianming;

..............page:117-120

xin xi dong tai

..............page:121,前插1