Plastic wrinkling prediction in thin-walled part forming process: A review
Liu Nan;Yang He;Li Heng;Yan Siliang;State Key Laboratory of Solidification Processing;School of Materials Science and Engineering;Northwestern Polytechnical University;

..............page:1-14

Progress of continuously rotating detonation engines
Zhou Rui;Wu Dan;Wang Jianping;Center for Combustion and Propulsion;College of Engineering;Peking University;Center for Applied Physics and Technology;Peking University;State Key Laboratory for Turbulence & Complex Systems;Peking University;

..............page:15-29

Microstructure control techniques in primary hot working of titanium alloy bars: A review
Guo Lianggang;Fan Xiaoguang;Yu Gaofeng;Yang He;State Key Laboratory of Solidification Processing;School of Materials Science and Engineering;Northwestern Polytechnical University;

..............page:30-40

A hybrid original approach for prediction of the aerodynamic coefficients of an ATR-42 scaled wing model
Abdallah Ben Mosbah;Ruxandra Mihaela Botez;Thien My Dao;Department of Automated Production Engineering;cole de Technologie Supérieure;University of Quebec;Laboratory of Applied Research in Active Controls;Avionics and Aero Servo Elasticity LARCASE;Department of Automated Production Engineering;cole de Technologie Supérieure;University of Quebec;Laboratory of Applied Research in Active Controls;Avionics and Aero Servo Elasticity LARCASE;Department of Mechanical Engineering;cole de Technologie Supérieure;University of Quebec;

..............page:41-52

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method
Chang-Joo Kim;Soo Hyung Park;Sang Kyung Sung;Sung-Nam Jung;Department of Aerospace Information Engineering;Konkuk University;

..............page:53-65

Boundary-layer transition prediction using a simplified correlation-based model
Xia Chenchao;Chen Weifang;School of Aeronautics and Astronautics;Zhejiang University;

..............page:66-75

Aeroelastic scaling laws for gust load alleviation control system
Tang Bo;Wu Zhigang;Yang Chao;School of Aeronautic Science and Engineering;Beihang University;

..............page:76-90

Gust response analysis and wind tunnel test for a high-aspect ratio wing
Liu Yi;Xie Changchuan;Yang Chao;Cheng Jialin;School of Aeronautic Science and Engineering;Beihang University;Chengdu Aircraft Industrial Co. Ltd.;

..............page:91-103

Parametric study of turbine NGV blade lean and vortex design
Zhang Shaowen;David G.Mac Manus;Luo Jianqiao;Department of Turbine Design;China Aviation Powerplant Research Institute;AVIC;School of Aerospace;Transport and Manufacturing;Cranfield University;

..............page:104-116

An investigation of tip vortices unsteady interaction for Fokker 29 propeller with swirl recovery vane
Li Qingxi;Wang Yangang;G.Eitelberg;School of Power and Energy;Northwestern Polytechnical University;Aerospace Engineering;Delft University of Technology;

..............page:117-128

Characteristic analysis of lock-in for an elastically suspended airfoil in transonic buffet flow
Quan Jingge;Zhang Weiwei;Gao Chuanqiang;Ye Zhengyin;School of Aeronautics;Northwestern Ploytechnical University;

..............page:129-143

Nonlinear flutter wind tunnel test and numerical analysis of folding fins with freeplay nonlinearities
Yang Ning;Wang Nan;Zhang Xin;Liu Wei;Beijing Institute of Electronic System Engineering;

..............page:144-159

Non-uniform hybrid strategy for architecting and modeling flight vehicle focused system-of-systems operations
Tian Yifeng;Liu Hu;Luo Mingqiang;Huang Jun;School of Aeronautic Science and Engineering;Beihang University;

..............page:160-172

Nonlinear thermomechanical deformation behaviour of P-FGM shallow spherical shell panel
Vishesh Ranjan Kar;Subrata Kumar Panda;Department of Mechanical Engineering;National Institute of Technology;

..............page:173-183

Trajectory optimization of multiple quad-rotor UAVs in collaborative assembling task
Chen Yongbo;Yu Jianqiao;Mei Yuesong;Zhang Siyu;Ai Xiaolin;Jia Zhenyue;School of Aerospace Engineering;Beijing Institute of Technology;

..............page:184-201

Three-dimensional guidance law based on adaptive integral sliding mode control
Song Junhong;Song Shenmin;Center for Control Theory and Guidance Technology;Harbin Institute of Technology;

..............page:202-214

Indirect Radau pseudospectral method for the receding horizon control problem
Liao Yuxin;Li Huifeng;Bao Weimin;School of Astronautics;Beihang University;Science and Technology Committee;China Aerospace Science and Technology Corporation;

..............page:215-227

A novel biased proportional navigation guidance law for close approach phase
Su Wenshan;Yao Dangnai;Li Kebo;Chen Lei;College of Aerospace Science and Engineering;National University of Defense Technology;

..............page:228-237

Singularity problem of control moment gyro cluster with vibration isolators
Cui Yinghui;Zheng Gangtie;School of Aerospace;Tsinghua University;

..............page:238-247

A new method of single celestial-body sun positioning based on theory of mechanisms
Zhang Wei;Xu Xiaofeng;Wu Yuanzhe;Airport College;Civil Aviation University of China;Aviation Ground Special Equipment Research Base;Aeronautical Automation College;Civil Aviation University of China;Aeronautical Engineering College;Civil Aviation University of China;

..............page:248-256

Out of phase thermal mechanical fatigue investigation of a directionally solidified superalloy DZ125
Hu Xiaoan;Yang Xiaoguang;Shi Duoqi;Yu Huichen;School of Energy and Power Engineering;Beihang University;Beijing Institute of Aeronautical Materials;

..............page:257-267

Ultrasound assisted solidification process of ternary Cu–Sn–Sb alloy
Zhai Wei;Hong Zhenyu;Liu Haiman;Wei Bingbo;Department of Applied Physics;Northwestern Polytechnical University;

..............page:268-273

Experimental research on electrochemical machining of titanium alloy Ti60 for a blisk
Chen Xuezhen;Xu Zhengyang;Zhu Dong;Fang Zhongdong;Zhu Di;College of Mechanical and Electrical Engineering;Nanjing University of Aeronautics & Astronautics;

..............page:274-282

Formation of interlayer gap and control of interlayer burr in dry drilling of stacked aluminum alloy plates
Tian Wei;Hu Jian;Liao Wenhe;Bu Yin;Zhang Lin;College of Mechanical and Electronical Engineering;Nanjing University of Aeronautics and Astronautics;

..............page:283-291

Analyses toward factors influencing sealing clearance of a metal rubber seal and derivation of a calculation formula
Yan Hui;Zhao Yalei;Liu Jianguo;Jiang Hongyuan;School of Mechatronics Engineering;Harbin Institute of Technology;

..............page:292-296

Guide for Authors

..............page:297