Chinese Journal of Aeronautics 2013 Issue 3 A novel approach of testability modeling and analysis for PHM systems based on failure evolution mechanism

A novel approach of testability modeling and analysis for PHM systems based on failure evolution mechanism
Tan Xiaodong;Qiu Jing;Liu Guanjun;Lv Kehong;Yang Shuming;Wang Chao

..............page:766-776

A satellite schedulability prediction algorithm for EO SPS
Li Jun;Li Jun;Jing Ning;Hu Weidong;Chen Hao

..............page:705-716

Static aeroelastic analysis of very flexible wings based on non-planar vortex lattice method
Xie Changchuan;Wang Libo;Yang Chao;Liu Yi

..............page:514-521

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap
Sun Zhenqi;Huang Minghui

..............page:601-605

Stability analysis of an aeroelastic system with friction
Tan Tiancai;Li Min;Liu Baihui

..............page:624-630

A novel LAAS pseudo-range error over-bound method based on improved pseudo-range error distribution model
Xue Rui;Wang Zulin

..............page:638-645

Composite control method for stabilizing spacecraft attitude in terms of Rodrigues parameters
Sun Haibin;Li Shihua

..............page:687-696

Friction compensation for low velocity control of hydraulic flight motion simulator: A simple adaptive robust approach
Yao Jianyong;Jiao Zongxia;Han Songshan

..............page:814-822

Effect of tip geometry and tip clearance on aerodynamic performance of a linear compressor cascade
Zhong Jingjun;Han Shaobing;Lu Huawei;Kan Xiaoxu

..............page:583-593

Hybrid calibration method for six-component force/torque transducers of wind tunnel balance based on support vector machines
Ma Yingkun;Xie Shilin;Zhang Xinong;Luo Yajun

..............page:554-562

Guide for Authors

..............page:封3

Study on ballistic penetration resistance of titanium alloy TC4, Part Ⅱ: Numerical analysis
Zhang Tao;Chen Wei;Guan Yupu;Gao Deping;Li Shuguang

..............page:606-613

Adaptive path planning for unmanned aerial vehicles based on bi-level programming and variable planning time interval
Liu Wei;Zheng Zheng;Cai Kaiyuan

..............page:646-660

Yield anisotropy and tension/compression asymmetry of a Ni3Al based intermetallic alloy
Chen Lei;Wen Weidong;Cui Haitao;Zhang Hongjian;Xu Ying

..............page:801-806

Influence of thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations
Su Wanxing;Li Shipeng;Zhang Qiao;Li Junwei;Ye Qingqing;Wang Ningfei

..............page:544-553

Gaseous plume flows in space propulsion
Wang Limei;Cai Chunpei

..............page:522-528

Model-based robustness testing for avionics-embedded software
Yang Shunkun;Liu Bin;Wang Shihai;Lu Minyan

..............page:730-740

Adaptive block dynamic surface control for integrated missile guidance and autopilot
Hou Mingzhe;Liang Xiaoling;Duan Guangren

..............page:741-750

Panel/full-span free-wake coupled method for unsteady aerodynamics of helicopter rotor blade
Tan Jianfeng;Wang Haowen

..............page:535-543

Aircraft-on-ground path following control by dynamical adaptive backstepping
Chen Bihua;Jiao Zongxia;Shuzhi Sam Ge

..............page:668-675

Closed-loop dynamic control allocation for aircraft with multiple actuators
Gai Wendong;Wang Honglun

..............page:676-686

Relay selection based on MAP estimation for cooperative communication with outdated channel state information
Ding Wenrui;Fei Li;Gao Qiang;Liu Shuo

..............page:661-667

Real-time fault detection method based on belief rule base for aircraft navigation system
Zhao Xin;Wang Shicheng;Zhang Jinsheng;Fan Zhiliang;Min Haibo

..............page:717-729

Codes cross-correlation analysis and data/pilot code pairs optimization for Galileo E1 OS and GPS L1C
Yang Zaixiu;Huang Zhigang;Geng Shengqun

..............page:751-765

Safety estimation of structural systems via interval analysis
Wang Xiaojun;Wang Lei;Qiu Zhiping

..............page:614-623

Numerical study of unsteady starting characteristics of a hypersonic inlet
Wang Weixing;Guo Rongwei

..............page:563-571

Review of shock wave detection method in CFD post-processing
Wu Ziniu;Xu Yizhe;Wang Wenbin;Hu Ruifeng

..............page:501-513

Improvement of Baldwin-Lomax turbulence model for supersonic complex flows
Zhao Rui;Yan Chao;Yu Jian;Li Xinliang

..............page:529-534

Infrared radiation signature of exhaust plume from solid propellants with different energy characteristics
Wang Weichen;Li Shipeng;Zhang Qiao;Wang Ningfei

..............page:594-600

Mechanistic identification of cutting force coefficients in bull-nose milling process
Gao Ge;Wu Baohai;Zhang Dinghua;Luo Ming

..............page:823-830

Reliability analysis of aero-engine blades considering nonlinear strength degeneration
Lin Jiewei;Zhang Junhong;Yang Shuo;Bi Fengrong

..............page:631-637

A novel autonomous self-assembly distributed swarm flying robot
Wei Hongxing;Li Ning;Liu Miao;Tan Jindong

..............page:791-800

Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors
Vilmos Simon

..............page:777-790

Investigations on damage resistance of carbon fiber composite panels toughened using veils
Zhu Lingang

..............page:807-813

Numerical analysis on noise of rotor with unconventional blade tips based on CFD/Kirchhoff method
Wang Bo;Zhao Qijun;Xu Guohua;Ye Liang;Wang Junyi

..............page:572-582

A robust solution for hesitate phenomenon in pick up process of aerospace electromagnetic relay
Ye Xuerong;Deng Jie;Ma Yue;Zhai Guofu;Yan Jihong

..............page:697-704