Journal of Aerospace Power 2011 Issue 3 Influence of suction-side winglet length on tip leakage flow in compressor cascade

Influence of suction-side winglet length on tip leakage flow in compressor cascade
HAN Shao-bing1;ZHONG Jing-jun1;YAN Hong-ming2

..............page:656-661

Nonlinear acoustic dissipation mechanism of a slit resonator
DAI Xi-wen;JING Xiao-dong;SUN Xiao-feng

..............page:530-536

Numerical simulation of sound radiation from moving bodies based on immersed boundary method
LIANG An;ZHONG Guo-hua;SUN Xiao-feng

..............page:512-517

Comparison research on performance and size of micro axial turbine and radial turbine
XIA Chen;HUANG Guo-ping;QIU Jian

..............page:489-497

Aero-engine health monitoring method based on joint entropy of symbolic series
SHI Yong-sheng;JIANG Ying;SONG Yun-xue

..............page:670-674

Investigation on residual stress of plasma sprayed thermal barrier coatings based on moire interferometry and hole drilling method
QI Hong-yu;LIU Jin-long;YANG Xiao-guang;WANG Jing-ke

..............page:617-621

Effects of loading distribution on a vaned diffuser
CAO Si;LIU Bao-jie

..............page:662-669

Sequential inspection method for long-storage-products based on storage degradation mechanism
FENG Jing

..............page:611-616

Analysis of inlet pre-swirl influence on aerodynamic performance in highly loaded transonic fan
ZHAO Bin;LIU Bao-jie

..............page:642-648

Pressure drop characteristics of supercritical aviation kerosene in U-turn tube
HUANG Wen;DENG Hong-wu;XU Guo-qiang;ZHU Kun

..............page:582-587

Comparative study on the numerical computation of convective heat transfer over rough surfaces
YANG Sheng-hua;LIN Gui-ping;SONG Xin

..............page:570-575

Torque feed-forward control of engine/helicopter system based on support vector regression
SUN Li-guo;SUN Jian-guo;ZHANG Hai-bo;CHEN Guo-qiang

..............page:680-686

Experimental study of the discharge coefficient of film outflow varying with the internal cooling channel’s height
MAO Jun-kui1;HU Bo2;SU Yun-liang3;GUO Wen3

..............page:543-550

Quantitative detection approach for transmission system of helicopter based on physical model and gray relational analysis
CHENG Zhe;HU Niao-qing;QIN Guo-jun

..............page:716-720

Investigation on hypersonic inward turning inlets with controlled pressure gradient
NAN Xiang-jun1;ZHANG Kun-yuan1;JIN Zhi-guang1;SUN Bo2

..............page:518-523

Chaos arithmetic for civil aero-engine forecasting
SONG Yun-xue;PENG Peng;SHI Yong-sheng

..............page:675-679

SysML-based safety analysis of thrust reverser
YIN Shu-yue1;YANG Yun2;MIAO Xue-wen2;ZHAO Ting-di1

..............page:498-504

Momentum wheel Wiener process degradation modeling and life prediction
LI Hai-tao1;JIN Guang1;ZHOU Jing-lun1; ZHOU Zhong-bao2;WU Chun-hua3

..............page:622-627

Overview of recycling-rescaling method for inflow boundary conditions of LES and DNS of compressible wall bounded turbulent flows
LIU Wei-dong;CHEN Ti;SUN Ming-bo; FAN Xiao-qiang;LIANG Jian-han

..............page:505-511

Experiments of leakage effects of rub-grooves on straight-through labyrinth seals
JI Guo-jian1;JI Hong-hu2;WANG Zheng-wei1

..............page:558-562

Method of lifetime and reliability of some helicopter’s main reducer
XUE Xiang-zhen;LI Yu-xi;WANG San-min

..............page:635-641

Macro and micro scale coupled constitutive model based on virtual displacement principle
GAO Xi-guang;SONG Ying-dong;SUN Zhi-gang

..............page:593-602

Analysis of characteristic and mechanism of pipe diffuser for a highly loaded centrifugal compressor
WANG Yi1;2;ZHAO Sheng-feng1;2;LU Xin-gen1;ZHU Jun-qiang1

..............page:649-655

Numerical study of the flow characteristics and excitation parameters for the sparkjet actuator
SHAN Yong;ZHANG Jing-zhou;TAN Xiao-ming

..............page:551-557

Approximate model-based optimum design for wall temperature of floatwall
GUO Jia-liang;WEN Wei-dong;CUI Hai-tao;GAO Jian-hui

..............page:588-592

Analysis on support reaction of asymmetric gear based on friction between teeth
LI Xiu-lian1;2;WANG Gui-cheng1;ZHU Fu-xian2; ZHOU Jin-yu2;HE Qing2

..............page:704-710

Incipient fault detection for aero-engine rotor based on frequency compression of stochastic resonance
WANG Guo-fu1;2;ZHANG Hai-ru1;ZHANG Fa-quan1;YE Jin-cai1

..............page:603-610

Investigation of mode transition in a dual mode supersonic combustor with hydrogen fuel
LIU Hao;SONG Wen-yan;WANG Dian

..............page:576-581

General simulation on modularization of liquid rocket engine
ZHANG Li-hui;LI Wei;DUAN Na

..............page:687-691

hang kong dong li xue bao zheng gao jian ze

..............page:476

Parameters optimizing for a turbofan engine cleaning system using flow field simulation
JIANG Ke-yi1;SHEN Wei1;LI Ben-wei1;LIU Hai-feng1;MA Li2

..............page:481-488

Whole flight envelop corrected equilibrium manifold modeling for a turbofan engine
LI Shu-qing1;ZHANG Sheng-xiu1;HU Wei-hong2

..............page:537-542

Abnormal recognition algorithm based on manifold learning for turbopump mass data
XIA Lu-rui1;2;HU Niao-qing1;QIN Guo-jun1

..............page:698-703

Analysis of reliability sensitivity for gear engagement based on response surface methods
LI Chang;HAN Xing

..............page:711-715

Numerical simulation of enhanced heat transfer in tubes using methane steam reforming
MAO Zhi-fang;JIANG Pei-xue;LIU Feng

..............page:563-569

Research on flow visualization of coaxial gas-gas injector mixing flowfield
JIN Ping;DU Zheng-gang;YANG Li-jun;CAI Guo-biao

..............page:692-697

Experimental study of particle damping for a two-dimensional vibrating structure
TANG Wei;WANG Yan-rong;WANG Zhou-cheng;Bhatti Riaz Ahmad

..............page:628-634

Low-diffusion preconditioning scheme for numerical simulation of low-speed flows
CAO Ning1;2;WU Song-ping1;2

..............page:524-529