Journal of Aerospace Power 2009 Issue 11 Influence of inlet dynamic total pressure flow field on gas-turbine engine stability margin

Influence of inlet dynamic total pressure flow field on gas-turbine engine stability margin
LI Xiao-tang;WANG Qin;XUE Xiu-sheng;WANG Liang;XING Zhi-guo;WANG Hong-xiang

..............page:2403-2409

Response surface method of reliability sensitivity analysis for accessory gearbox outlet temperature
SHI Yan-yan;SUN Zhi-li;LI Guo-quan;GUO Mei;YAN Ming

..............page:2532-2537

Particle image velocimetry(PIV) measurements of the flow in a rotating cavity with a radial inflow
YU Xiao;LUO Xiang;XU Guo-qing;SUN Ji-ning

..............page:2483-2488

Critical technologies for aero-engine prognostics and health management systems development
JIANG Cai-hong;SUN Zhi-yan;WANG Xi

..............page:2589-2594

Effects of car models proportion and wind tunnel cross section on aerodynamic characteristics of car
XU Xiao-ming;ZHAO You-qun

..............page:2471-2475

Predicting method for the performance of constant area isolator under back pressure
YUAN Hua-cheng;LIANG De-wang;GUO Rong-wei;LI Bo

..............page:2421-2428

Swallowing water capability experiment of one turbine-shaft overall aviation engine
KUANG Gui-lan;WANG Dao-bo;SHAN Xiao-ming;WU Zhi-yong;WEI Hai-long

..............page:2415-2420

Mieroturbo engine development and key technology analysis
SU San-mai;ZHANG Lei;CAI Yuan-hu;TU Qiu-ye

..............page:2410-2414

Experimental investigation of mixing characteristics of jet from circle-rectangular transition nozzle
ZHANG Bo;JI Hong-hu;HUANG Wei;CAO Guang-zhou;YANG Hai

..............page:2476-2482

Damping ratio experiment study on rotary blade based on distributing excitation unloaded instantaneously
CHEN Mo-li;LI Shun-ming

..............page:2521-2526

Method for analyzing flow losses in turobmachinery by using the measured results of stereoscopic particle image velocimetry
LIU Bao-jie;YU Xian-jun;JIANG Hao-kang

..............page:2551-2557

Design and tests of jet fuel starter-assisted airstarts for turbofan engines
ZHANG Shao-ji;BING Lian-xi

..............page:2584-2588

Modeling and load analysis of spiral bevel gears power split system
GU Jian-gong;FANG Zong-de;PANG Hui;WANG Cheng

..............page:2625-2630

Research on system reliability growth assessment model
HAN Qing-tian;LU Hong-yi;ZHANG Yi

..............page:2527-2531

Preliminary analysis of thermodynamic cycle of an intercooled recuperated turbofan engine
CAO Meng-yuan;TANG Hai-long;CHEN Min

..............page:2465-2470

Numerical simulation on flow and heat transfer in rotating channel with small spacing pin-fin arrays
ZHANG Li;ZHU Hui-ren;LIU Song-ling

..............page:2489-2494

Research on meshing characteristics-based design of point-contact tooth surface
ZHOU Kai-hong;TANG Jin-yuan;YAN Hong-zhi

..............page:2612-2617

Investigation of flow characteristic and performance on the "Jaws" hypersonic inlet
DONG Hao;WANG Cheng-peng;CHENG Ke-ming

..............page:2429-2435

Optimization of momentum-biased wheel rotor based on its static and dynamic properties
SUN Xiao-juan;LIU Bo;JIA Hong-guang

..............page:2538-2544

Experiment on the induced airflow acceleration by plasma aerodynamic actuation
ZHAO Xiao-hu;LI Ying-hong;LI Yi-wen;WU Yun;MA Qing-yuan

..............page:2436-2442

Design and analysis of loaded transmission errors for aviation spiral bevel gears
CAO Xue-mei;ZHANG Hua;FANG Zong-de

..............page:2618-2624

Evaluation of elastic properties of 3-D 4-direction braided composites
WEN Wei-dong;SHAO Jiang;CUI Hai-tao;XU Ying

..............page:2514-2520

Analysis of the hydrogen combustion field in scramjet dual-cavity combustor
LIU Juan;PAN Yu;LIU Wei-dong;WANG Zhen-guo

..............page:2501-2505

Three-variables robust controller design for aero-engine
WANG Qian-yu;SUN Jian-guo;LI Qiu-hong

..............page:2607-2611

A design method of mixed flow fan for helicopters
LI Ming;GAO Hong-xia;YU Jian-zu;CHANG Li

..............page:2577-2583

Effect of bowed and swept rotors on the unsteady efficiency fluctuation of a transonic compressor
MAO Ming-ming;SONG Yan-ping;WANG Zhong-qi

..............page:2564-2569

Instabilities of boundary layers along a tilt plate dissipating uniform heat flux
TAO Jian-jun;XIONG Xiang-ming

..............page:2397-2402

Two-dimensional compressible model for compressor instability analysis
WANG Zhi-qiang;ZHANG Huan;HU Jun;TU Bao-feng

..............page:2570-2576

Experimental study the effect of flare sleeve length on the flowfield and spray characterization of a combustor swirl cup
YU Jin-feng;GUO Zhi-hui;ZHANG Jun-feng;SHANG Shou-tang

..............page:2506-2513

Control law of turboshaft engine for helicopter autorotation training
HUANG Kai-ming;HUANG Jing-quan;ZHOU Wen-xiang;FENG Xing;HUANG Bo

..............page:2595-2600

Investigation of ring aerodynamic throat for solid rocket motor
XIE Kan;LIU Yu;WANG Yi-bai

..............page:2631-2636

Numerical simulation of weakly ionized gas hypersonic flow under uniform magnetic field
HUANG Fu-lai;HUANG Hu-lin

..............page:2443-2451

Improvement of Laval nozzle calculation model and simulative verification in aero-engine performance calculation
ZHOU Wen-xiang;HUANG Jin-quan;ZHOU Ren-zhi

..............page:2601-2606

Method of optimization of a stator vane setting in multistage axial-flow compressors
WU Hu;SUN Na

..............page:2558-2563

Three-dimensional conjugate heat transfer simulation for the surface temperature of wing hot-air anti-icing system
BU Xue-qin;LIN Gui-ping;YU Jia

..............page:2495-2500

Rotor-wing interaction analysis of a compound helicopter in forward flight
WAN Jia;CHEN Ming

..............page:2459-2464

Study on the reliability of a single-sweep space marching algorithm for hypersonic flows
YANG Pan;CHEN Bing;XU Xu

..............page:2452-2458

Response of two-disk rotor with squeeze film dampers and its variation with parameters
WANG Hong-jin;QIN Wei-yang;YANG Shu-lin;DENG Wang-qun

..............page:2545-2550