Forging & Stamping Technology 2005 Issue z1 New progress, application and prospect of semi-solid forming technology

New progress, application and prospect of semi-solid forming technology
YIN Xiang-wen;YOU Xiao-hong

..............page:13-17

Application of the group technology in the forging production
GAO Jun;BIAN Yi;ZHANG Xiao-guang;LI Lun-gen;ZHONG Zhi-ping;MA Gang

..............page:10-13

State of art and trend of spinning technology in China
LI Ji-zhen;LI Zhi-qiang;YU Xiao-fang

..............page:17-20

All-hydraulic driving and program-controlling for forging hammer--The only way for the development of advanced forging hammer technology in China
ZHANG Chang-long

..............page:20-24

Research on backward extrusion process of NiTi SMA cup
CHEN Yu;ZHANG Wei-hong;ZHANG Shi-hong;KANG Da-chang

..............page:48-51

Cross wedge rolling for forming hollow part with equal inner diameter
XU Chun-guo;REN Guang-sheng;QIU Yong-ming

..............page:51-55

Study of formability of TWBs on different thickness
TONG Zheng-guo;TIAN Hao-bin;LIN Jian-ping;L. M.Smith

..............page:55-58

Numeralization modification and manufacture of car bevel gear
WANG Xin-yun;XIA Ju-chen;HU Guo-an;CHEN Xia

..............page:58-61

Industrial application and its results of precision roll forging for YQ153A front axle
JIANG Peng;YU Guang-zhong;CAO Fei

..............page:62-65,74

Precision forming method of the single direction driven gear
MENG Ling-xian;SONG Xue-jin;ZHANG Yuan-guo

..............page:66-68

Research of the equalizer buffer parameter design ifor 10MN shearer
LIU Zhi-liang

..............page:94-95

Investigation on a new type of mechanical press with flexible and controllable transmission mechanism
ZHAO Sheng-dun;WANG Jun;HE Yu-peng;ZHANG Zhi-yuan;ZOU Jun

..............page:96-102

Calculation for the rolling pressure of Y-type rolling mill
LIU Zhi-Liang

..............page:103-105

Design and manufacture of copper alloy solid bearing cage automatic delivering and heating equipment
YANG Xi;YANG Yong-shun

..............page:106-108

Study on pre-tightening of housing of precision cold ring rolling mill
YAN Feng-Lin;HUA Lin

..............page:108-111

Once drawing technology of oil-pan and the design of die
DU Ji-tao

..............page:112-113

Analysis and preventing measure on the lapsed form of hot extrusive die
LI Ke-min;WANG Yu-lin;QIANG Zhao-hui

..............page:126-129

Collaborative design and its application in die & mould die design
LI Chang;LI Jian-jun;XIAO Xiang-zhi

..............page:171-174

Effects of contact pressure and sliding velocity on the frictional coefficient of zinc-coated sheets
JIANG Hao-min;CHEN Xin-ping;YU Ning-feng;FENG Wei-jun;SU Hai-bo

..............page:129-132

Research on continuous cooling transformation and microstructure of X70 acicular ferrite pipeline steel
ZHANG Li-hong;YU Hao;YANG Xian-li;KANG Yong-lin

..............page:132-136,139

Status and trend in the development of the research on the processing technic for NiTi SMA
CHEN Wei;ZHANG Wei-hong;LIU Li-hua;CAI Wei;WANG Li-ming;SUN Wen

..............page:24-30

Hot-die forge process of direct aging for GH4169 super alloy turbine disks
YE Jun-qing;ZHANG Hua;YING Zhi-yi

..............page:31-33

Numerical simulation of bulk ingot upsetting and void fault closing with M method
HUANG Hua-gui;DU Feng-shan;ZANG Xin-liang

..............page:34-37

Design of cropper handgrip seats in stamping figuration
PENG Cheng-yun;HU Jing-pei

..............page:37-39

Research on applications of variable section blanks in the auto-body manufacturing
DU Ji-tao;QI Cong-qian

..............page:39-43

Current state and trend of tube spinning
WANG Qun;HE Yi-qiang;SUN You-ping;CHEN Zhen-hua;XU Zheng-kun

..............page:43-47

Research on microstructure and properties of TA15 titanium alloy ring forging
YANG Hong-tao;HE Jian-xiong;TAN Yong;WANG Yao-xiang;WANG Shu-yun;LI Hui-qu;JI Sheng

..............page:137-139

Structure and mechanical properties of GH3044 die forging
TAN Yong;HE Jian-xiong;YANG Hong-tao;WANG Yao-xiang;ZHANG Long;JI Sheng;WANG Shu-yun;LI Hui-qu

..............page:140-141,144

Effects of powder size on high temperature deformation behavior of FGH95 alloy
JI Sheng;WANG Shu-yun;LI Hui-qu;YANG Hong-tao;HU He

..............page:142-144

Effect of surface integrity on fatigue properties of ultra-high strength steel
JIN Lei;SU Bin

..............page:145-146,148

Nitriding and vacuum heat treatment teat for spinning mandrel
YAO Chun-chen;ZENG Chui-hai;LI Zhi-mo;LIU Zan-hui

..............page:147-148

Preliminary FEM analysis of anchor head under stress
LI Gui-lan;CHEN Wen-lin

..............page:149-152

Numerical simulation on drawing process of a tailor-welded part
ZHOU Quan;TIAN Hao-bin;LIN Jian-ping;L.M.Smith

..............page:152-155

Progress of forging and stamping technique and equipments in Shanghai
WANG Yi-hua

..............page:7-10

AC servo motor driving a new developing trend for forming equipment
SUN You-song;ZHOU Xian-hui;HUANG Kai-sheng;WANG Hong-gui;WEI Liang-mo;HE Hong-su

..............page:1-6

Theoretic analysis of contact surfaces between workpiece and roller of axial feed bar rolling
YUAN Xiang-yong;XU Chun-guo;REN Guang-sheng

..............page:156-159

Application study of plastic processing method in P/M superalloys
LUO Xue-jun;JI Sheng

..............page:159-162

Numerical simulation and experiment research of airbag parts in car
LI Lun-gen;BIAN Yi;WEI Zhe;ZHANG Xiao-guang;ZHONG Zhi-ping;YANG Rui-feng

..............page:163-165

Technology improvement and numerical simulation of the cold forging of gear
HU Cheng-liang;LIU Quan-kun;WANG Qiang;SUN Zheng-mao

..............page:166-168

Predicting the hardness distribution inside of spur gear by finite element coupling method
WANG Wei-qin;SUN Hong-xing;XI Qing-po;LIU Hua;HUO Yan-jun

..............page:169-170,174

Design of rapid replacing structure for high-speed-press multi-position progressive die
LI Wen-sheng;WANG Ke-sheng;Wu Nan-cai

..............page:114-115,125

Study on process optimization in multi-stage flashless die forging of gear blanks
ZHU Wan-qian;LIU Xiao-fei;CHEN Guo-xue

..............page:116-118

Push bending process and die with variable radius for rectangle tube
xiao xiao ting ; liao yi juan ; sun you song ; zhang zheng rong ; . ; . . .

..............page:119-121

Numerical simulation about the force and temperature distributing of the floating plug drawing die
HUANG Dong-Nan;ZHANG Shi-Hong;WANG Peng-Cheng;TANG Zheng-Kui

..............page:122-125

Theory analysis on the forming limit of deep tine taper hole formed by open-die cold extrusion
MAO Hao-en;ZHANG Shuang-jie;ZENG Fu-ming;LU Su-ling;LI Jun

..............page:175-176,179

Study on comparison with several models in the process of rolling simulation for copper alloy
HUANG Guo-jie;LIU Rui-qing;XU Yong;LI Lei;CAI Wei

..............page:177-179

Study on the relation of hardness and equivalent strain inside of cold forgings
WANG Wei-qin;SUN Hong-xing;XI Qing-po;LIU Hua;HUO Yan-jun

..............page:180-182

Study on relations of springback and mesh size in U-profile sheet metal bending
TIAN Ji-hong;LIU Yan

..............page:182-185

Study on numerical simulation for wire rod based on thermal-mechanical deformation
YANG Li-cheng;Liu Bo;YUE Zhi-gang

..............page:185-189

Thermo-mechanical coupled meshless analysis for rigid-viscoplastic deformation processes
WU Xin;ZHAO Guo-qun;GUAN Yan-jin;WANG Wei-dong

..............page:189-193

Study on combination warm drawing process to NiTi SMA tubing
CHEN Wei;ZHANG Wei-hong;LIU Li-hua;LI Yun-liang;CAI Wei;WANG Li-ming;SUN Wen

..............page:194-198

Development of a web-based mould CBR system
ZHOU Chi;MA Kai;RUAN Feng;HUANG Zhen-yuan

..............page:199-201

Application of CAD/CAE in the design of automobile dash board
YUAN Ning;RUAN Feng;MA Kai

..............page:202-204,213

Quality management system based on WEB for production of copper tubes
LIU Jing-song;ZHANG Hai-qiu;JIANG Nian-xiang;LI Zhang-gang;ZHANG Shi-hong;ZHANG Jin-li

..............page:205-208

Portable sheet metal strain measurement system GMAS
WU Xiang-dong;WAN Min;LI Sheng

..............page:208-210

Finite element analysis of cross for plate mill
WANG Li-ming;KANG Yong-lin;CHEN Qing-jun;SUN Hao;WANG Chun-mei;LIU Fu-yi

..............page:211-213

zong mu lu

..............page:214-219

China Society for Technology of Plasticity CMES (formerly Forging and Stamping Institution of CMES)

..............page:220-221

qian yan

..............page:插页

FEM simulation of forging process of crank
CAO Fei;JIANG Peng;Cui Hong-juan;ZHANG Ji-guang

..............page:68-71

Study on isothermal extrusion forming technology for the copper alloy solid bearing retainer
CHEN Fu-xiao;YANG Yong-shun;GUO Jun-qing

..............page:71-74

CAD/CAM and its application in precision roll forging die of automobile front axle
HU Fu-rong;JIANG Peng;YU Guang-zhong

..............page:75-78,82

Analysis of tube cracks of LF6 alloy in flow turning
WANG Ben-xian;LU Xin-yu;ZHANG Shi-hong;WANG Bing-de

..............page:79-82

Research of the power parameter experimentation in ten roll straightener
Liu Zhi-liang

..............page:83-85

Model building of generalized modular product family of framed hydraulic press based on CBR
ZHONG Wei-hong;XU Yan-shen

..............page:86-91

Test research and numerical simulation on the sinking process with equal lengths using a general hydropress
GAO Peng-fei;WANG Lian-dong;CUI Ya-ping

..............page:91-93,105